Search results for: '25mt hook loss cable tie reel 80 qty'

MPO MicroCable Fan-Out Assembly.

MPO Fan-Out Assemblies interface multifiber MPO with discrete single fiber (LC/SC) connectors. Assemblies are typically used to directly interconnect MPO  cassettes, panels or backbone trunk assemblies with the active equipment ports, saving costly data center rack space and easing fiber management. Replacing traditional MPO  module Fan-Out Assemblies reduce amount of interconnection improving power budget cost effectiveness.   

See PDF Download For More Information.

This 1U Pre-term Breakout Panel is designed to provide housing for connections from a preterm to patch cords. The open frame allows for quick and easy installation of connectors. Having the option to use an array of different adapter types by using a different front plate makes this panel suitable for a wide range of applications. A key feature of the panel is that it provides space within the 1U space to route the patch cords through to the back of the rack.

40G QSFP+ (MPO) To QSFP+ Assembly.

See PDF Download For More Information.

MPO Loose Tube Trunk.

LooseTube Cable Assemblies  utilize the patented AFL Hyperscale® transition module and guarantees superior tensile strength and crushing resistance. The high density design can scale from 2 up to 144 fibers and can feature both 900 µm and ruggedised 2 mm tail leads. Assemblies can comprise of both multifiber MPO and discrete connectors, making the cable a flexible hybrid solution for diverse applications.

See PDF Download For More Information.

S03 1U Black Sliding Patch Panel - 24 Position SC/LC/E2000 up to 48 fibers

See Spec Sheet for more information

UltraSlim Panel 1U 19" MPO - Up To 96 Fibers.

The UltraSlim Panels provide secure transitions between MPO and LC or SC discrete connector interfaces. They are used to interface MPO  backbones with LC or SC patching and active equipment connections.

See PDF Download For More Information.

40G QSFP+ (MPO) To 4x10G SFP+ (8xLC) Assembly.

40G parallel optics transceivers (40GBASE-SR4) can support 4x10G modes– this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. MPO QSFP+ to SFP+ Fan-out Assemblies provide connections between single QSFP+ (40G transceiver with MPO interface) and 4 x SFP+ (10G transceivers with LC(DX) Interface). Parallel optics 40GBASE-SR4 uses 8 out of 12 MPO interface fibers transmitting 4 x Duplex (DX) channels (4 x Transmit and 4 x Receive). QSFP+ to SFP+ Fanout is 8 x Fibers MPO to LC(DX) Ruggedized Fan-out assembly. Assembly utilizes new miniature version of breakout module saving fiber management space and providing secure transition between cable and tails.

See PDF Download For More Information.

UHD Mass Ribbon Splice Module.

UHD Mass Splice modules provides patching solution for AFL SpiderWeb Ribbon (SWR®) or ribbons cable types.

See PDF Download For More Information.

3x40G QSFP+ (MPO) To 12x10G SFP+ (8xLC) Transition Module.

40G parallel optics transceivers like QSFP+ can support 4x10G modes– this feature allows new parallel optics active equipment being compatible with existing 10G transceivers.3x40G QSFP+ (MPO) to 12x10G SFP+ (8xLC) Transition Module provides interface between 3xQSFP+ (40G transceiver with MPO interface) and 12xSFP+ devices (10G transceivers with LC(DX) Interface).Transition modules introduce convenient patching position facilitating potential adds, changes or reconfigurations to installed cabling and is a perfect alternative to fixed equipment to equipment connections provided by QSFP+ to SFP+ Fan-out Assemblies. Single 3x40G QSFP+ (MPO) to 12x10G SFP+ (8xLC) Transition Module provides a transition function of 3xQSFP+ to SFP+ Fan-out Assemblies.

See PDF Download For More Information.

Ultra High Density MPO (24 Fiber Ferrule) Module.

Ultra High Density 24 fibers Module with single rear MPO/MTP port provide an interface between 24xfibers ferrules MPO/MTP Trunks or Patchleads and LC interface of active equipment.

See PDF Download For More Information.