Search results for: '20db reel 20m black hook loss p no 500m'

Category 6_A U/FTP LSZH cables are designed to deliver a robust standards based performance ensuring optimum bandwidth for today’s high speed network applications. The cable is designed to support horizontal networking applications over distances up to 100 meters.

Each Category 6_A U/FTP LSZH exceed the minimum specified performance for Category 6_A U/FTP cables and support all CLASS EA applications as defined within ISO/IEC 11801 (2nd Edition): 2010 such as 10GBASE-T (Gigabit Ethernet), 2G FCBASE-T, 4G FCBASE-T and 1000BASE-T (Gigabit Ethernet).

SEE DATA SHEET DOWNLOAD FOR MORE INFORMATION.

Category 6_A U/FTP PVC cables are designed to deliver a robust standards based performance ensuring optimum bandwidth for today’s high speed network applications. The cable is designed to support horizontal networking applications over distances up to 100 meters.

Each Category 6_A U/FTP PVC exceed the minimum specified performance for Category 6_A U/FTP cables and support all CLASS EA applications as defined within ISO/IEC 11801 (2nd Edition): 2010 such as 10GBASE-T (Gigabit Ethernet), 2G FCBASE-T, 4G FCBASE-T and 1000BASE-T (Gigabit Ethernet).

SEE DATA SHEET DOWNLOAD FOR MORE INFORMATION.

40G QSFP+ 3:2 (MPO) Transition Assembly.

See PDF Download For More Information.

MPO MicroCable Trunk Assembly.

MPO MicroCable Trunks facilitate rapid deployment of high density backbone cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are used to interconnect cassettes, panels or ruggedised MPO Fan Outs, spanning MDA, HDA and EDA zones.

See PDF Download For More Information.

MPO MicroCable Patch Assembly (Single Jacket 3mm OD).

MPO MicroCable Patch assemblies facilitate rapid deployment of high density cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are typically used for patching within MDA zone or interconnect MPO active equipment ports with backbone cabling.

See PDF Download For More Information.

MPO MicroCable Fan-Out Assembly.

MPO Fan-Out Assemblies interface multifiber MPO with discrete single fiber (LC/SC) connectors. Assemblies are typically used to directly interconnect MPO  cassettes, panels or backbone trunk assemblies with the active equipment ports, saving costly data center rack space and easing fiber management. Replacing traditional MPO  module Fan-Out Assemblies reduce amount of interconnection improving power budget cost effectiveness.   

See PDF Download For More Information.

40G QSFP+ (MPO) To QSFP+ Assembly.

See PDF Download For More Information.

RJ21 Cat3 25pair Telco cable

180 degree male connector with Bail Lock to Open end telco cable

Bail lock notches at the sides are for the female connector that's normally on a piece of equipment.

CAN MANUFACTURE TO ANY LENGTH REQUIRED - PLEASE CALL FOR ASSISTANCE.

RJ21 Cat3 25pair Telco cable

180 degree male connector with Bail Lock to 180 Degree Male Connector with screws.

Bail lock notches at the sides are for the female connector that's normally on a piece of equipment.

CAN MANUFACTURE TO ANY LENGTH REQUIRED - PLEASE CALL FOR ASSISTANCE.

RJ21 Cat3 25pair Telco cable

180 degree male connector with Bail Lock to 180 Degree Female Connector with screws.

Bail lock notches at the sides are for the female connector that's normally on a piece of equipment.

CAN MANUFACTURE TO ANY LENGTH REQUIRED - PLEASE CALL FOR ASSISTANCE

RJ21 Cat3 25pair Telco cable

180 degree male connector with Bail Lock to 90 Degree Male Connector with screws.

Bail lock notches at the sides are for the female connector that's normally on a piece of equipment.

CAN MANUFACTURE TO ANY LENGTH REQUIRED - PLEASE CALL FOR ASSISTANCE