Search results for: 'LC-ST 50/125 OM3 fibre cable'

Excel Internal/External Grade SWA Fibre Cable 8 Core 9/125 OS2 P/No 205-368 

• Can be cut to any length required, please call if you cannot see length required.

Excel Internal/External Grade SWA Fibre Cable 24 Core 9/125 OS2 P/NO 205-362 

• Can be cut to any length required, please call if you cannot see length required.

MPO MicroCable Patch Assembly (Single Jacket 3mm OD).

MPO MicroCable Patch assemblies facilitate rapid deployment of high density cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are typically used for patching within MDA zone or interconnect MPO active equipment ports with backbone cabling.

See PDF Download For More Information.

MPO MicroCable Trunk Assembly.

MPO MicroCable Trunks facilitate rapid deployment of high density backbone cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are used to interconnect cassettes, panels or ruggedised MPO Fan Outs, spanning MDA, HDA and EDA zones.

See PDF Download For More Information.

LC Connector Extraction Tool

3x40G QSFP+ (MPO) To 12x10G SFP+ (8xLC) Transition Module.

40G parallel optics transceivers like QSFP+ can support 4x10G modes– this feature allows new parallel optics active equipment being compatible with existing 10G transceivers.3x40G QSFP+ (MPO) to 12x10G SFP+ (8xLC) Transition Module provides interface between 3xQSFP+ (40G transceiver with MPO interface) and 12xSFP+ devices (10G transceivers with LC(DX) Interface).Transition modules introduce convenient patching position facilitating potential adds, changes or reconfigurations to installed cabling and is a perfect alternative to fixed equipment to equipment connections provided by QSFP+ to SFP+ Fan-out Assemblies. Single 3x40G QSFP+ (MPO) to 12x10G SFP+ (8xLC) Transition Module provides a transition function of 3xQSFP+ to SFP+ Fan-out Assemblies.

See PDF Download For More Information.

2x40G QSFP+ (MPO) To 8x10G SFP+ (16xLC) Transition Module.

40G parallel optics transceivers like QSFP+ can support 4x10G modes– this feature allows new parallel optics active equipment being compatible with existing 10G transceivers.2x40G QSFP+ (MPO/MTP®) to 8x10G SFP+ (16xLC) Transition Module provides interface between 2xQSFP+ (40G transceiver with MPO/MTP® interface) and 8xSFP+ devices (10G transceivers with LC(DX) Interface).Transition modules introduce convenient patching position facilitating potential adds, changes or reconfigurations to installed cabling and is a perfect alternative to fixed equipment to equipment connections provided by QSFP+ to SFP+ Fan-out Assemblies. Single 2x40G QSFP+ (MPO/MTP®) to 8x10G SFP+ (16xLC) Transition Module provides a transition function of 2xQSFP+ to SFP+ Fan-out Assemblies. All optical ports are positioned in front of UHD modules providing convenient front access.

See PDF Download For More Information.

MPO/MTP Loop Back.

MPO/MTP Loopback are used widely within testing environment especially within parallel optics 40 and 100G networks. Devices allow verification and testing of transceivers featuring MPO/MTP interface - 40G BASED-SR4 QSFP+ or 100G BASE-SR10 CXP/CFP devices. Loopbacks are built to link Transceivers (TX) and Receivers (RX) positions of MPO/MTP transceivers interfaces. MPO/MTP loopbacks can facilitate and speed up IL testing of optical networks segments by connecting them to MPO/MTP trunks/patch leads.

See PDF Download For More Information.

40G QSFP+ (MPO) To QSFP+ Assembly.

See PDF Download For More Information.