Search results for: '24 reel 24 black hook loss p no 500m'

VG224 24w RJ45 Leaded Panel - 2mt Male tail 90 Degree Hood.

Active on pins 4 & 5 Suitable for Cisco Voice VG224 & VG310 Gateway.

VG224 24w RJ45 Leaded Panel - 3mt Male tail 90 Degree Hood.

Active on pins 4 & 5 Suitable for Cisco Voice VG224 & VG310 Gateway.

VG224 24w RJ45 Leaded Panel - 5mt Male tail 90 Degree Hood.

Active on pins 4 & 5 Suitable for Cisco Voice VG224 & VG310 Gateway.

VG224 24w RJ45 Leaded Panel - 10mt Male tail 90 Degree Hood.

Active on pins 4 & 5 Suitable for Cisco Voice VG224 & VG310 Gateway.

VG224 24w RJ45 Leaded Panel - 20mt Male tail 90 Degree Hood.

Active on pins 4 & 5 Suitable for Cisco Voice VG224 & VG310 Gateway.

VG310 24w RJ45 Leaded Panel - 2mt Male Tail 90 Degree Hood.

Active on pins 4 & 5 Suitable for Cisco Voice VG224 & VG310 Gateway.

VG310 24w RJ45 Leaded Panel - 15mt Male Tail 90 Degree Hood.

Active on pins 4 & 5 Suitable for Cisco Voice VG224 & VG310 Gateway.

40G QSFP+ 3:2 (MPO) Transition Assembly.

See PDF Download For More Information.

Ultra High Density Modules are the platform for hosting pre-terminated cable assemblies. Solution brings advantage of speed installation, improved power budget as well as improved economics vs traditional modular MPO systems.Assemblies can be pre-installed inside modules in the factory and supplied to the installation site for instant deployment ready to operate. Alternatively if required pre-terminated cables can be fitted inside module post installation in the field.Variety of configuration is available intermixing “No plug, just play” modules with MPO trunks and modules, splice modules and variety of multifiber cable assemblies.

See PDF Download For More Information.

MPO MicroCable Trunk Assembly.

MPO MicroCable Trunks facilitate rapid deployment of high density backbone cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are used to interconnect cassettes, panels or ruggedised MPO Fan Outs, spanning MDA, HDA and EDA zones.

See PDF Download For More Information.

MPO MicroCable Patch Assembly (Single Jacket 3mm OD).

MPO MicroCable Patch assemblies facilitate rapid deployment of high density cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are typically used for patching within MDA zone or interconnect MPO active equipment ports with backbone cabling.

See PDF Download For More Information.

MPO/MTP Loop Back.

MPO/MTP Loopback are used widely within testing environment especially within parallel optics 40 and 100G networks. Devices allow verification and testing of transceivers featuring MPO/MTP interface - 40G BASED-SR4 QSFP+ or 100G BASE-SR10 CXP/CFP devices. Loopbacks are built to link Transceivers (TX) and Receivers (RX) positions of MPO/MTP transceivers interfaces. MPO/MTP loopbacks can facilitate and speed up IL testing of optical networks segments by connecting them to MPO/MTP trunks/patch leads.

See PDF Download For More Information.

40G QSFP+ (MPO) To QSFP+ Assembly.

See PDF Download For More Information.