Search results for: '50WFEMALE RIGHT ANGLE OPEN END CABLE'

MPO MicroCable Patch Assembly (Single Jacket 3mm OD).

MPO MicroCable Patch assemblies facilitate rapid deployment of high density cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are typically used for patching within MDA zone or interconnect MPO active equipment ports with backbone cabling.

See PDF Download For More Information.

RJ21 Cat3 25pair Telco cable

180 degree male connector with Bail Lock to 180 Degree Male Connector with screws.

Bail lock notches at the sides are for the female connector that's normally on a piece of equipment.

CAN MANUFACTURE TO ANY LENGTH REQUIRED - PLEASE CALL FOR ASSISTANCE.

RJ21 Cat3 25pair Telco cable

180 degree male connector with Bail Lock to 180 Degree Female Connector with screws.

Bail lock notches at the sides are for the female connector that's normally on a piece of equipment.

CAN MANUFACTURE TO ANY LENGTH REQUIRED - PLEASE CALL FOR ASSISTANCE

RJ21 Cat3 25pair Telco cable

180 degree male connector with Bail Lock to 90 Degree Male Connector with screws.

Bail lock notches at the sides are for the female connector that's normally on a piece of equipment.

CAN MANUFACTURE TO ANY LENGTH REQUIRED - PLEASE CALL FOR ASSISTANCE

RJ21 Cat3 25pair Telco cable

180 degree male connector with Bail Lock to 90 Degree Female Connector with screws.

Bail lock notches at the sides are for the female connector that's normally on a piece of equipment.

CAN MANUFACTURE TO ANY LENGTH REQUIRED - PLEASE CALL FOR ASSISTANCE

UltraSlim Base-8 96xFibres Transition V-Panel 1U 19" 12xMPO To 144LC.

UltraSlim Base-8 Transition panel is designed to allow connection of Base-8 100/40G (MPO) with lower speeds 25/10G interfaces (LC DX). Fixed panel offers both installation speed and cost effectiveness against typical high density modular system. The shallow depth of UltraSlim profile is unique making it suitable for low depth cabinet or racking systems. V shape profiled front together with cable management accessories facilitates managing front and rear cabling.  Low loss MPO and LC Premium terminations are offered featuring significantly improved low insertion losses for demanding low power budget, high speed networks. 

See PDF Download For More Information.

UltraSlim Base-8 144xFibres Transition V-Panel 1U 19" 18xMPO To 144LC.

UltraSlim Base-8 Transition panel is designed to allow connection of Base-8 100/40G (MPO) with lower speeds 25/10G interfaces (LC DX). High density design offers optimal space management with extraction tool free finger access to LC ports.Fixed panel offers both installation speed and cost effectiveness against legacy high density modular system. The shallow depth of UltraSlim profile is unique making it suitable for low depth cabinet or racking systems. V shape profiled front together with cable management accessories facilitates managing front and rear cabling. Low loss MPO and LC Premium terminations are offered featuring significantly improved low insertion losses for demanding low power budget, high speed networks. 

See PDF Download For More Information.

Ultra High Density Copper Module.

UHD (Ultra High Density) Copper Module compliments UHD system allowing for copper links to co-exist in common with fiber optics oriented high density management. Copper module if fully compatible with 0U, 1U and 2U UHD chassis system and 2U Patching frame accepting up to 5 modules in 1U and up to 12 x modules in 2U space. Standard module comes with 4 x Category 6A screened tool free RJ-45 keystone jacks for on-site cable termination. Module can be used as a platform to install factory made copper preterm assemblies.   

See PDF Download For More Information.

MPO MicroCable Trunk Assembly.

MPO MicroCable Trunks facilitate rapid deployment of high density backbone cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are used to interconnect cassettes, panels or ruggedised MPO Fan Outs, spanning MDA, HDA and EDA zones.

See PDF Download For More Information.

40G QSFP+ (MPO) To 4x10G SFP+ (8xLC) Assembly.

40G parallel optics transceivers (40GBASE-SR4) can support 4x10G modes– this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. MPO QSFP+ to SFP+ Fan-out Assemblies provide connections between single QSFP+ (40G transceiver with MPO interface) and 4 x SFP+ (10G transceivers with LC(DX) Interface). Parallel optics 40GBASE-SR4 uses 8 out of 12 MPO interface fibers transmitting 4 x Duplex (DX) channels (4 x Transmit and 4 x Receive). QSFP+ to SFP+ Fanout is 8 x Fibers MPO to LC(DX) Ruggedized Fan-out assembly. Assembly utilizes new miniature version of breakout module saving fiber management space and providing secure transition between cable and tails.

See PDF Download For More Information.

• RJ21 Cat3 Telco Male - Male
• UK manufactured and 100% tested
• Available with 90 degree, 120 degree and 180 degree hoods
• Other lengths can be manufactured to order

• RJ21 Cat3 Telco Male - Female.
• UK manufactured and 100% tested
• Available with 90 degree, 120 degree and 180 degree hoods
• Other lengths can be manufactured to order

• RJ21 Cat3 Telco Female - Female.
• UK manufactured and 100% tested
• Available with 90 degree, 120 degree and 180 degree hoods
• Other lengths can be manufactured to order

IEC (C14) to IEC Lock Plus (C13) Black.