Search results for: '9 1m flat twin os1 sc sc'

Brother TZe-251 label tape 24mm black on white 

MPO MicroCable Patch Assembly (Single Jacket 3mm OD).

MPO MicroCable Patch assemblies facilitate rapid deployment of high density cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are typically used for patching within MDA zone or interconnect MPO active equipment ports with backbone cabling.

See PDF Download For More Information.

MPO/MTP Loop Back.

MPO/MTP Loopback are used widely within testing environment especially within parallel optics 40 and 100G networks. Devices allow verification and testing of transceivers featuring MPO/MTP interface - 40G BASED-SR4 QSFP+ or 100G BASE-SR10 CXP/CFP devices. Loopbacks are built to link Transceivers (TX) and Receivers (RX) positions of MPO/MTP transceivers interfaces. MPO/MTP loopbacks can facilitate and speed up IL testing of optical networks segments by connecting them to MPO/MTP trunks/patch leads.

See PDF Download For More Information.

40G QSFP+ (MPO) To QSFP+ Assembly.

See PDF Download For More Information.

40G QSFP+ 3:2 (MPO) Transition Assembly.

See PDF Download For More Information.

CXP/CFP 100G MPO Cable Assembly.

CXP/CFP 100G MPO/MTP® cable assemblies are designed to make a connection between 2 CFP/CXP transceivers. They are built using 24 fiber ferrule MPO/MTP  connectors with custom fiber mapping polarity to provide connection between 100GBASE-SR10 CFP/CXP devices.

See PDF Download For More Information.

MPO 24 Fiber Ferrule Cable Assembly.

MPO 24xFibers Ferrule Cable Assembly is a product designed for cable infrastructure which is used or which is due to be upgraded for parallel optics 40/100G protocols like 100GBASE-SR10 or 40GBASE-SR4. Assembly is built using 24xfibers ferrule interface MPO connectors which can be used directly with CFP/CXP 100G transceivers or when used together with Transition Modules/ Cables can provide 100G compatible infrastructure for 40G QSFP+ transceivers.

See PDF Download For More Information.

Ultra High Density UltraSlim Panel 1U 19" MPO - Up To 144 Fibers.

The AFL Hyperscale® Ultra High Density (UHD) UltraSlim Panel is specially designed to accommodate high density cabling in high end data center and telecommunication central office environment. The shallow depth of the UHD UltraSlim Panel makes it suitable for low depth copper racking systems or telecommunications ODFs. Design accommodates extraction free shuttered LC QUAD adapters allowing for smooth patching and easy LC port access. The 1U 19“, 144 fiber MPO UltraSlim Panel contains factory controlled and tested MPO - LC assembly to deliver optical performance and reliability.Low loss Premium MPO and LC Premium versions are offered featuring significantly improved low insertion losses for demanding low power budget, high speed networks. Front and rear cable management facilitates provides a neat and tidy solution for managing incoming and exiting cables.

See PDF Download For More Information.