Search results for: 'Patch cord Cat5e FTP 0.5m White'

CSB10  FTTH Customer Outlet.

This wall termination box is designed for FTTH applications, with similar dimensions to existing telephone connections it is well suited to home or office environments. The box can allow up to 4 fibers whilst maintaining the minimum bend radius. A variety of adapters (LC/SC, & square ST, FC) can be used giving the user a flexible solution.

The compact termination box is designed for use in residential and business applications for the termination of up to four fibers. The wall box enables the installation of either a single Blown Tube cable using up to a 4 fiber blown unit or two 2 fiber ruggedised cables to be spliced to four SC pigtails (PC or APC), which connect to adapters at the base of the unit. The unit can be quickly installed within an office, house or communication room environment.

TOR 10/40G And 25/100G Parallel Optics Solutions.

Modular Top of Rack Panel has been designed to provide a host for MPO to LC fanouts allowing high density intermediate LC patching between MPO and LC(DX) interface.

The modular design gives a flexible solution allowing storage of slack and direct connection to switches in a standard 19“ profile.

Intermediate patching positions makes it easier  to reconfigure and manage adds and changes not available with single QSFP MPO to LC Fan-out connections. Provides performance/ cost effectiveness advantage against transition panels.

See PDF Download For More Information.

UHD Mass Ribbon Splice Module.

UHD Mass Splice modules provides patching solution for AFL SpiderWeb Ribbon (SWR®) or ribbons cable types.

See PDF Download For More Information.

Ultra High Density Copper Module.

UHD (Ultra High Density) Copper Module compliments UHD system allowing for copper links to co-exist in common with fiber optics oriented high density management. Copper module if fully compatible with 0U, 1U and 2U UHD chassis system and 2U Patching frame accepting up to 5 modules in 1U and up to 12 x modules in 2U space. Standard module comes with 4 x Category 6A screened tool free RJ-45 keystone jacks for on-site cable termination. Module can be used as a platform to install factory made copper preterm assemblies.   

See PDF Download For More Information.

MPO/MTP Loop Back.

MPO/MTP Loopback are used widely within testing environment especially within parallel optics 40 and 100G networks. Devices allow verification and testing of transceivers featuring MPO/MTP interface - 40G BASED-SR4 QSFP+ or 100G BASE-SR10 CXP/CFP devices. Loopbacks are built to link Transceivers (TX) and Receivers (RX) positions of MPO/MTP transceivers interfaces. MPO/MTP loopbacks can facilitate and speed up IL testing of optical networks segments by connecting them to MPO/MTP trunks/patch leads.

See PDF Download For More Information.

UltraSlim Panel 1U 19" MPO - Up To 96 Fibers.

The UltraSlim Panels provide secure transitions between MPO and LC or SC discrete connector interfaces. They are used to interface MPO  backbones with LC or SC patching and active equipment connections.

See PDF Download For More Information.

40G QSFP+ (MPO) To 4x10G SFP+ (8xLC) Assembly.

40G parallel optics transceivers (40GBASE-SR4) can support 4x10G modes– this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. MPO QSFP+ to SFP+ Fan-out Assemblies provide connections between single QSFP+ (40G transceiver with MPO interface) and 4 x SFP+ (10G transceivers with LC(DX) Interface). Parallel optics 40GBASE-SR4 uses 8 out of 12 MPO interface fibers transmitting 4 x Duplex (DX) channels (4 x Transmit and 4 x Receive). QSFP+ to SFP+ Fanout is 8 x Fibers MPO to LC(DX) Ruggedized Fan-out assembly. Assembly utilizes new miniature version of breakout module saving fiber management space and providing secure transition between cable and tails.

See PDF Download For More Information.