Search results for: 'rj21 cat5 telco 90 degree mode 100'

HP ProCurve J9142B Compatible Gigabit Bi-Directional SFP Module

• HP ProCurve Compatible
• SFP Form Factor
• Gigabit Speed
• 10km Transmission Distance 
• Downstream Bi-Directional
• 1490/1310nm Wavelength
• Simplex LC Connector

Enable bi-directional fibre optic transmission on your HP ProCurve brand switches, routers, security appliances and more using a single strand of fibre. The HP ProCurve J9142B Compatible Gigabit Bi-Di SFP Module by Advance is fully tested to ensure 100% compliance with all HP ProCurve switches, routers, appliances and devices that support J9142B modules. Fast plug-and-play operation, simply insert the Advance module into a spare SFP port and enjoy Gigabit speeds using a single strand of singlemode fibre.

Cat6 24w Panel - Panel cable loom (4 x 6way braided Sleeved Loom. labelled for identification.

Cat6a 24w Panel - Panel cable loom (4 x 6way braided Sleeved Loom) labelled for identification.

Custom Cable 24w Keystone Loom Cat6a. Pre Terminated Cable looms Vpanel-panel. Fully tested, all cables are supplied using braided sleeving and sleeved in 4 x 6way looms for ease of installation Panel - Panel.labelled for identification.Image is indicative only. Pre loomed plug and play solution.

MPO MicroCable Trunk Assembly.

MPO MicroCable Trunks facilitate rapid deployment of high density backbone cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are used to interconnect cassettes, panels or ruggedised MPO Fan Outs, spanning MDA, HDA and EDA zones.

See PDF Download For More Information.

MPO MicroCable Fan-Out Assembly.

MPO Fan-Out Assemblies interface multifiber MPO with discrete single fiber (LC/SC) connectors. Assemblies are typically used to directly interconnect MPO  cassettes, panels or backbone trunk assemblies with the active equipment ports, saving costly data center rack space and easing fiber management. Replacing traditional MPO  module Fan-Out Assemblies reduce amount of interconnection improving power budget cost effectiveness.   

See PDF Download For More Information.

UltraSlim Panel 1U 19" MPO - Up To 96 Fibers.

The UltraSlim Panels provide secure transitions between MPO and LC or SC discrete connector interfaces. They are used to interface MPO  backbones with LC or SC patching and active equipment connections.

See PDF Download For More Information.

MPO LGX Cassette Module.

MPO LGX Cassette Modules provide secure transition between MPO and LC or SC discrete connectors. They are used to interconnect MPO backbones with LC or SC patching. This modular system allows for rapid deployment of high density data center infrastructure as well as improved troubleshooting and reconfiguration during moves, adds and changes. Cassettes can be mounted in 1U or 3U 19” multislot chassis. MPO Cassettes contain factory controlled and tested MPO to LC or SC fanouts to deliver optical performance and reliability. Low loss Premium MPO and LC or SC Premium versions are offered featuring low insertion loss for demanding power budget high speed networks.

See PDF Download For More Information.

40G QSFP+ (MPO) To QSFP+ Assembly.

See PDF Download For More Information.

40G QSFP+ 3:2 (MPO) Transition Assembly.

See PDF Download For More Information.

CXP/CFP 100G MPO Cable Assembly.

CXP/CFP 100G MPO/MTP® cable assemblies are designed to make a connection between 2 CFP/CXP transceivers. They are built using 24 fiber ferrule MPO/MTP  connectors with custom fiber mapping polarity to provide connection between 100GBASE-SR10 CFP/CXP devices.

See PDF Download For More Information.

MPO 24 Fiber Ferrule Cable Assembly.

MPO 24xFibers Ferrule Cable Assembly is a product designed for cable infrastructure which is used or which is due to be upgraded for parallel optics 40/100G protocols like 100GBASE-SR10 or 40GBASE-SR4. Assembly is built using 24xfibers ferrule interface MPO connectors which can be used directly with CFP/CXP 100G transceivers or when used together with Transition Modules/ Cables can provide 100G compatible infrastructure for 40G QSFP+ transceivers.

See PDF Download For More Information.