Search results for: 'panel keystone'

VG224 24w RJ45 Leaded Panel - 20mt Male tail 90 Degree Hood.

Active on pins 4 & 5 Suitable for Cisco Voice VG224 & VG310 Gateway.

Learn More

VG310 24w RJ45 Leaded Panel - 2mt Male Tail 90 Degree Hood.

Active on pins 4 & 5 Suitable for Cisco Voice VG224 & VG310 Gateway.

Learn More

VG310 24w RJ45 Leaded Panel - 15mt Male Tail 90 Degree Hood.

Active on pins 4 & 5 Suitable for Cisco Voice VG224 & VG310 Gateway.

Learn More

24 port 1U rack mountable CAT5e patch panel which is a great solution for network and cable management. The UT-8224 offers a clearly labelled, neat and effective CAT5e pass through panel which is ideal for the heart of any medium sized network. Product Code: UT-8224 Learn More

Excel Environ CR800 Comms Rack 42U high x 800mm wide x 600mm deep without side panels - Grey White - 542-4286-GSNF-GW Learn More

Ultra High Density Copper Module.

UHD (Ultra High Density) Copper Module compliments UHD system allowing for copper links to co-exist in common with fiber optics oriented high density management. Copper module if fully compatible with 0U, 1U and 2U UHD chassis system and 2U Patching frame accepting up to 5 modules in 1U and up to 12 x modules in 2U space. Standard module comes with 4 x Category 6A screened tool free RJ-45 keystone jacks for on-site cable termination. Module can be used as a platform to install factory made copper preterm assemblies.   

See PDF Download For More Information.

Learn More

VG320 Voice Gateway - Male RJ21 Leaded Pane Learn More

Excel Cabinet Earth Bonding Kit - Wall P/No: 540-095.

An Earth Bonding Kit is installed between the frame and doors, all panels are fitted with earth studs.

Learn More

TOR 10/40G And 25/100G Parallel Optics Solutions.

Modular Top of Rack Panel has been designed to provide a host for MPO to LC fanouts allowing high density intermediate LC patching between MPO and LC(DX) interface.

The modular design gives a flexible solution allowing storage of slack and direct connection to switches in a standard 19“ profile.

Intermediate patching positions makes it easier  to reconfigure and manage adds and changes not available with single QSFP MPO to LC Fan-out connections. Provides performance/ cost effectiveness advantage against transition panels.

See PDF Download For More Information.

Learn More

The 6U HCF Splicing & Patch Frame is a high density rack mountable fiber management solution that splices and patches up to 864 fibers in a 6RU cabinet space. The 6U HCF has ribbon cabling splicing via a rear positioned hinge down panels that is supplied with a latching feature for both open and closed positions and shuttered Ultra High Density LC adapter modules on the front of the frame, allowing for smooth patching and easy LC port access.

Learn More

Connectix Elite Management Bar P/No 009-001-008-30. Learn More

Connectix Elite cable Management Bar P/No 009-001-008-30. Learn More

MPO MicroCable Trunk Assembly.

MPO MicroCable Trunks facilitate rapid deployment of high density backbone cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are used to interconnect cassettes, panels or ruggedised MPO Fan Outs, spanning MDA, HDA and EDA zones.

See PDF Download For More Information.

Learn More

12 Way Splice Bridge Learn More

MPO MicroCable Fan-Out Assembly.

MPO Fan-Out Assemblies interface multifiber MPO with discrete single fiber (LC/SC) connectors. Assemblies are typically used to directly interconnect MPO  cassettes, panels or backbone trunk assemblies with the active equipment ports, saving costly data center rack space and easing fiber management. Replacing traditional MPO  module Fan-Out Assemblies reduce amount of interconnection improving power budget cost effectiveness.   

See PDF Download For More Information.

Learn More