This innovative, robust 1U pivot patch panel has been designed to accept up to 48 fibers housed within a 1U space.With the ability to use a full array of adapter types offering a flexible solution to the end user, enabling them to incorporate a multifunctional panel which allows easy access during installation or re-work with no disturbance of the existing cable or fibers.

Learn More

Dome 05-09 Fiber Splice Enclosure

Learn More

MPO MicroCable Fan-Out Assembly.

MPO Fan-Out Assemblies interface multifiber MPO with discrete single fiber (LC/SC) connectors. Assemblies are typically used to directly interconnect MPO  cassettes, panels or backbone trunk assemblies with the active equipment ports, saving costly data center rack space and easing fiber management. Replacing traditional MPO  module Fan-Out Assemblies reduce amount of interconnection improving power budget cost effectiveness.   

See PDF Download For More Information.

Learn More

8way Fibre Harness 9/125 OS1 singlemode MPO/MTP Fan Out Cable. Cable Trunk - 3mm, Tails - 2mm. OVERALL LENGTH INCLUDES 1MT TAILS. If you require a different length tail please advise at time of ordering. Learn More

12way Fibre Harness OM3 MPO/MTP Fan Out Cable. Male (M) and Female (F) MTP Connectors available. Cable Trunk - 3mm, Tails - 2mm. OVERALL LENGTH INCLUDES 1MT TAILS. If you require a different length tail please advise at time of ordering. Learn More

8way Fibre Harness OM4 MPO/MTP Fan Out Cable. Male (M) and Female (F) MTP connectors available. Cable Trunk - 3mm, Tails - 2mm. OVERALL LENGTH INCLUDES 1MT TAILS. If you require a different length tail please advise at time of ordering. Learn More

12way Fibre Harness OM4 MPO/MTP Fan Out Cable. Male (M) and Female (F) MTP Connectors Available. Cable Trunk - 3mm, Tails - 2mm. OVERALL LENGTH INCLUDES 1MT TAILS. If you require a different length tail please advise at time of ordering. Learn More

12way Fibre Harness 9/125 OS1 singlemode MPO/MTP Fan Out Cable. Male (M) and Female (F) MTP Connectors available. Cable Trunk - 3mm, Tails - 2mm. OVERALL LENGTH INCLUDES 1MT TAILS. If you require a different length tail please advise at time of ordering. Learn More

8way Fibre Harness OM3 MPO/MTP Fan Out Cable Aramid fibre reinforced cable with an LSZH jacket. Cable Trunk - 3mm, Tails - 2mm. Male (M) and Female (F) MTP connectors available. OVERALL LENGTH INCLUDES 1MT TAILS. If you require a different length tail please advise at time of ordering. Learn More

The FCP2 Fiber Cleaning Kit for SC/ST/FC/LC offers a complete selection of optical cleaning products for field cleaning of connector end-faces in a convenient duffle bag style carry case. It includes 1 x FCC2 cleaning fluid, 1 x FiberWipes , 1 x Cletop-SB, 1 x One-Click  Cleaner SC/ST/FC and 1 x One-Click  Cleaner MU/LC.

Learn More

The FCP2 Fiber Cleaning Kit for SC/ST/FC/LC/MPO offers a complete selection of optical cleaning products for field cleaning of connector end-faces in a convenient duffle bag style carry case. It includes 1 x FCC2 cleaning fluid, 1 x FiberWipes , 1 x Cletop-SB, 1 x One-Click  Cleaner SC/ST/FC, 1 x One-Click  Cleaner MU/LC and 1 x One-Click  Cleaner MPO .

Learn More

Dual OWL 850nm light source - ST connectivity 201-210 Learn More

MPO/MTP Loop Back.

MPO/MTP Loopback are used widely within testing environment especially within parallel optics 40 and 100G networks. Devices allow verification and testing of transceivers featuring MPO/MTP interface - 40G BASED-SR4 QSFP+ or 100G BASE-SR10 CXP/CFP devices. Loopbacks are built to link Transceivers (TX) and Receivers (RX) positions of MPO/MTP transceivers interfaces. MPO/MTP loopbacks can facilitate and speed up IL testing of optical networks segments by connecting them to MPO/MTP trunks/patch leads.

See PDF Download For More Information.

Learn More

Tri Hole Stripper

Learn More

This innovative, high density pivot panel is designed to accept 24 SC simplex footprint adapters within each of the four ½ U trays. Each tray fully manages the incoming fibers, pigtails and splices.The panel can pivot by up to 120° to allow easy access during installation or rework with no disturbance of the existing cable or fibers. Angled adapters route exiting patchcords directly into the cabinet side management.An optional bracket maintains the minimum bend radius in any direction. The panel can be assembled to pivot in either direction, facilitating cable entry from either side. Ventilation tracts allow free flow of air through the panel, providing highly efficient cooling for active equipment.

Learn More