Search results for: 'MALE 180'

12way Fibre Harness OM4 MPO/MTP Fan Out Cable. Male (M) and Female (F) MTP Connectors Available. Cable Trunk - 3mm, Tails - 2mm. OVERALL LENGTH INCLUDES 1MT TAILS. If you require a different length tail please advise at time of ordering. Learn More

12way Fibre Harness 9/125 OS1 singlemode MPO/MTP Fan Out Cable. Male (M) and Female (F) MTP Connectors available. Cable Trunk - 3mm, Tails - 2mm. OVERALL LENGTH INCLUDES 1MT TAILS. If you require a different length tail please advise at time of ordering. Learn More

8way Fibre Harness OM3 MPO/MTP Fan Out Cable Aramid fibre reinforced cable with an LSZH jacket. Cable Trunk - 3mm, Tails - 2mm. Male (M) and Female (F) MTP connectors available. OVERALL LENGTH INCLUDES 1MT TAILS. If you require a different length tail please advise at time of ordering. Learn More

40G QSFP+ (MPO) To QSFP+ Assembly.

See PDF Download For More Information.

Learn More

Trunk Cable OM3 Aqua 12 Fibre MTP-MTP Learn More

Trunk Cable OM4 Aqua 12 Fibre MTP-MTP Learn More

Trunk Cable 9/125 Aqua 12 Fibre MTP-MTP Learn More

MPO/MTP Loop Back.

MPO/MTP Loopback are used widely within testing environment especially within parallel optics 40 and 100G networks. Devices allow verification and testing of transceivers featuring MPO/MTP interface - 40G BASED-SR4 QSFP+ or 100G BASE-SR10 CXP/CFP devices. Loopbacks are built to link Transceivers (TX) and Receivers (RX) positions of MPO/MTP transceivers interfaces. MPO/MTP loopbacks can facilitate and speed up IL testing of optical networks segments by connecting them to MPO/MTP trunks/patch leads.

See PDF Download For More Information.

Learn More

MPO MicroCable Trunk Assembly.

MPO MicroCable Trunks facilitate rapid deployment of high density backbone cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are used to interconnect cassettes, panels or ruggedised MPO Fan Outs, spanning MDA, HDA and EDA zones.

See PDF Download For More Information.

Learn More

MPO MicroCable Patch Assembly (Single Jacket 3mm OD).

MPO MicroCable Patch assemblies facilitate rapid deployment of high density cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are typically used for patching within MDA zone or interconnect MPO active equipment ports with backbone cabling.

See PDF Download For More Information.

Learn More

MPO MicroCable Fan-Out Assembly.

MPO Fan-Out Assemblies interface multifiber MPO with discrete single fiber (LC/SC) connectors. Assemblies are typically used to directly interconnect MPO  cassettes, panels or backbone trunk assemblies with the active equipment ports, saving costly data center rack space and easing fiber management. Replacing traditional MPO  module Fan-Out Assemblies reduce amount of interconnection improving power budget cost effectiveness.   

See PDF Download For More Information.

Learn More

CXP/CFP 100G MPO Cable Assembly.

CXP/CFP 100G MPO/MTP® cable assemblies are designed to make a connection between 2 CFP/CXP transceivers. They are built using 24 fiber ferrule MPO/MTP  connectors with custom fiber mapping polarity to provide connection between 100GBASE-SR10 CFP/CXP devices.

See PDF Download For More Information.

Learn More

MPO 24 Fiber Ferrule Cable Assembly.

MPO 24xFibers Ferrule Cable Assembly is a product designed for cable infrastructure which is used or which is due to be upgraded for parallel optics 40/100G protocols like 100GBASE-SR10 or 40GBASE-SR4. Assembly is built using 24xfibers ferrule interface MPO connectors which can be used directly with CFP/CXP 100G transceivers or when used together with Transition Modules/ Cables can provide 100G compatible infrastructure for 40G QSFP+ transceivers.

See PDF Download For More Information.

Learn More