Search results for: '1m premium media data cable tray x 3 male'

MPO MicroCable Fan-Out Assembly.

MPO Fan-Out Assemblies interface multifiber MPO with discrete single fiber (LC/SC) connectors. Assemblies are typically used to directly interconnect MPO  cassettes, panels or backbone trunk assemblies with the active equipment ports, saving costly data center rack space and easing fiber management. Replacing traditional MPO  module Fan-Out Assemblies reduce amount of interconnection improving power budget cost effectiveness.   

See PDF Download For More Information.

Learn More

VG320 Voice Gateway - Male RJ21 Leaded Pane Learn More

White round cable clip, suits 3 to 5mm cable dia Learn More

The MicroScanner2 Cable Verifier presents a revolutionary change in voice, data, and video cable testing. It starts by taking results from what was four different test modes and displaying them all at once - graphical wiremap, pair lengths, distance to fault, cable ID, and far end device. What's more, its integrated RJ11, RJ45, and coax test ports support virtually any type of low-voltage cable testing with no need for awkward adaptors. The end result is reduced test time and technician error. That makes high-quality installations more efficient than ever. Revolutionary Interface - Graphical wiremap, length, cable ID, and distance to fault displayed on one screen Multimedia Support - Tests all common media types including RJ11, RJ45, Coax, with no need for adaptors IntelliTone Toning - Locates virtually any cable or wire pair with IntelliTone digital an analogue toning VDV Service Detection - Verifies today's media services, including 10/100/1000 Ethernet, POTS and PoE Rugged Housing - Integrated rubber holster enhances grip and makes it durable enough for the toughest jobs Oversized Display - Large, backlit LCD makes results crystal clear whether in bright sunshine or in a dark closet Learn More

• CAT3 RJ21 female Telco Breakout to 24 RJ45 Plugs.
• acative on pins 4 & 5.
• UK manufactured and 100% tested
• Available with 90 degree and 180 degree hoods
• Other lengths can be manufactured to order

Learn More

 

• RJ21 Cat3 Telco Male - Male
• UK manufactured and 100% tested
• Available with 90 degree, 120 degree and 180 degree hoods
• Other lengths can be manufactured to order

Learn More

Blank plate for 3 and 4 compartment boxes Learn More

Euromod plate for 3 compartment box Learn More

• Cat3 RJ21 Male Telco - 24 RJ11 ruggerdized tails.
• Each RJ11 leg are individually sleeved for extra protection.
• UK manufactured and 100% tested
• Available with 90 degree, 120 degree and 180 degree hoods
• Other lengths can be manufactured to order

Learn More

OTDR Triple Cable Fibre Launch Box loaded with a choice of 3 fibre cables up to 2km each and a choice of connectors from C ,FC/APC, SC, SC/APC , ST & LC. Learn More

•  PLEASE CALL FOR LENGTHS NOT SHOWN - WE CAN MANUFACTURE TO ANY LENGTH REQUIRED.

Cat6 UK Custom Made snagless booted LSZH ROLLOVER cable.

Learn More

MPO 24 Fiber Ferrule Cable Assembly.

MPO 24xFibers Ferrule Cable Assembly is a product designed for cable infrastructure which is used or which is due to be upgraded for parallel optics 40/100G protocols like 100GBASE-SR10 or 40GBASE-SR4. Assembly is built using 24xfibers ferrule interface MPO connectors which can be used directly with CFP/CXP 100G transceivers or when used together with Transition Modules/ Cables can provide 100G compatible infrastructure for 40G QSFP+ transceivers.

See PDF Download For More Information.

Learn More

• RJ21 Cat3 Telco Male - Female.
• UK manufactured and 100% tested
• Available with 90 degree, 120 degree and 180 degree hoods
• Other lengths can be manufactured to order

Learn More

• RJ21 Cat3 Telco Male - Open.
• UK manufactured and 100% tested
• Available with 90 degree, 120 degree and 180 degree hoods
• Other lengths can be manufactured to order

Learn More

40G QSFP+ (MPO) To 4x10G SFP+ (8xLC) Assembly.

40G parallel optics transceivers (40GBASE-SR4) can support 4x10G modes– this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. MPO QSFP+ to SFP+ Fan-out Assemblies provide connections between single QSFP+ (40G transceiver with MPO interface) and 4 x SFP+ (10G transceivers with LC(DX) Interface). Parallel optics 40GBASE-SR4 uses 8 out of 12 MPO interface fibers transmitting 4 x Duplex (DX) channels (4 x Transmit and 4 x Receive). QSFP+ to SFP+ Fanout is 8 x Fibers MPO to LC(DX) Ruggedized Fan-out assembly. Assembly utilizes new miniature version of breakout module saving fiber management space and providing secure transition between cable and tails.

See PDF Download For More Information.

Learn More