Search results for: '550m 4288 wdbf bk42 24 ndnn bk'

VG224 24w RJ45 Leaded Panel - 20mt Male tail 90 Degree Hood.

Active on pins 4 & 5 Suitable for Cisco Voice VG224 & VG310 Gateway.

VG310 24w RJ45 Leaded Panel - 2mt Male Tail 90 Degree Hood.

Active on pins 4 & 5 Suitable for Cisco Voice VG224 & VG310 Gateway.

VG310 24w RJ45 Leaded Panel - 15mt Male Tail 90 Degree Hood.

Active on pins 4 & 5 Suitable for Cisco Voice VG224 & VG310 Gateway.

Excel Internal/External Grade CST Armoured Fibre Cable 4 Core 50/125 OM4 P/No 204-204 

• Can be cut to any length required, please call if you cannot see length required

Excel Internal/External Grade CST Armoured Fibre Cable 12 Core 50/125 OM4 P/No 204-212 

• Can be cut to any length required, please call if you cannot see length required

Excel Internal/External Grade CST Armoured Fibre Cable 16 Core 50/125 OM4 P/No 204-216 

• Can be cut to any length required, please call if you cannot see length required

Ultra High Density Modules are the platform for hosting pre-terminated cable assemblies. Solution brings advantage of speed installation, improved power budget as well as improved economics vs traditional modular MPO systems.Assemblies can be pre-installed inside modules in the factory and supplied to the installation site for instant deployment ready to operate. Alternatively if required pre-terminated cables can be fitted inside module post installation in the field.Variety of configuration is available intermixing “No plug, just play” modules with MPO trunks and modules, splice modules and variety of multifiber cable assemblies.

See PDF Download For More Information.

MPO/MTP Loop Back.

MPO/MTP Loopback are used widely within testing environment especially within parallel optics 40 and 100G networks. Devices allow verification and testing of transceivers featuring MPO/MTP interface - 40G BASED-SR4 QSFP+ or 100G BASE-SR10 CXP/CFP devices. Loopbacks are built to link Transceivers (TX) and Receivers (RX) positions of MPO/MTP transceivers interfaces. MPO/MTP loopbacks can facilitate and speed up IL testing of optical networks segments by connecting them to MPO/MTP trunks/patch leads.

See PDF Download For More Information.

Ultra High Density (UHD) MPO Module.

UHD module with its unique footprint provides scalability for high density fiber optics infrastructure with up to 288 fibers inside a 2U space. Patented  LC Quad shuttered adapter design allows for connector finger access without the need of using extra extraction tool.

See PDF Download For More Information.

MPO MicroCable Fan-Out Assembly.

MPO Fan-Out Assemblies interface multifiber MPO with discrete single fiber (LC/SC) connectors. Assemblies are typically used to directly interconnect MPO  cassettes, panels or backbone trunk assemblies with the active equipment ports, saving costly data center rack space and easing fiber management. Replacing traditional MPO  module Fan-Out Assemblies reduce amount of interconnection improving power budget cost effectiveness.   

See PDF Download For More Information.

The 6U HCF Splicing & Patch Frame is a high density rack mountable fiber management solution that splices and patches up to 864 fibers in a 6RU cabinet space. The 6U HCF has ribbon cabling splicing via a rear positioned hinge down panels that is supplied with a latching feature for both open and closed positions and shuttered Ultra High Density LC adapter modules on the front of the frame, allowing for smooth patching and easy LC port access.