Search results for: 'optic fibre cable om1 om2 om3 cat to length'nvOpzp; AND 1=1 OR (<'">iKO)),'

This innovative, robust 1U pivot patch panel has been designed to accept up to 48 fibers housed within a 1U space.With the ability to use a full array of adapter types offering a flexible solution to the end user, enabling them to incorporate a multifunctional panel which allows easy access during installation or re-work with no disturbance of the existing cable or fibers.

This innovative, high density pivot panel is designed to accept 24 SC simplex footprint adapters within each of the four ½ U trays. Each tray fully manages the incoming fibers, pigtails and splices.The panel can pivot by up to 120° to allow easy access during installation or rework with no disturbance of the existing cable or fibers. Angled adapters route exiting patchcords directly into the cabinet side management.An optional bracket maintains the minimum bend radius in any direction. The panel can be assembled to pivot in either direction, facilitating cable entry from either side. Ventilation tracts allow free flow of air through the panel, providing highly efficient cooling for active equipment.

40G QSFP+ (MPO) To 4x10G SFP+ (8xLC) Assembly.

40G parallel optics transceivers (40GBASE-SR4) can support 4x10G modes– this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. MPO QSFP+ to SFP+ Fan-out Assemblies provide connections between single QSFP+ (40G transceiver with MPO interface) and 4 x SFP+ (10G transceivers with LC(DX) Interface). Parallel optics 40GBASE-SR4 uses 8 out of 12 MPO interface fibers transmitting 4 x Duplex (DX) channels (4 x Transmit and 4 x Receive). QSFP+ to SFP+ Fanout is 8 x Fibers MPO to LC(DX) Ruggedized Fan-out assembly. Assembly utilizes new miniature version of breakout module saving fiber management space and providing secure transition between cable and tails.

See PDF Download For More Information.

MPO MicroCable Trunk Assembly.

MPO MicroCable Trunks facilitate rapid deployment of high density backbone cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are used to interconnect cassettes, panels or ruggedised MPO Fan Outs, spanning MDA, HDA and EDA zones.

See PDF Download For More Information.

Excel Internal/External Grade CST Fibre Cable 4 Core 50/125 OM3 P/No 205-280 

• Can be cut to any length required, please call if you cannot see length required

Excel Internal/External Grade CST Fibre Cable 24 Core 50/125 OM3 P/No 205-284

• Can be cut to any length required, please call if you cannot see length required

Excel Internal/External Grade CST Fibre Cable 8 Core 50/125 OM3 P/No 200-281

• Can be cut to any length required, please call if you cannot see length required

Excel Internal/External Grade CST Fibre Cable 12 Core 50/125 OM3 P/No 205-282 

• Can be cut to any length required, please call if you cannot see length required

Excel Internal/External Grade CST Fibre Cable 16 Core 50/125 OM3 P/No 205-283

• Can be cut to any length required, please call if you cannot see length required

MPO MicroCable Patch Assembly (Single Jacket 3mm OD).

MPO MicroCable Patch assemblies facilitate rapid deployment of high density cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are typically used for patching within MDA zone or interconnect MPO active equipment ports with backbone cabling.

See PDF Download For More Information.