Search results for: 'testpmr1ipm4 or 12 select 100 from pg_sleep 15'

Ultra High Density Copper Module.

UHD (Ultra High Density) Copper Module compliments UHD system allowing for copper links to co-exist in common with fiber optics oriented high density management. Copper module if fully compatible with 0U, 1U and 2U UHD chassis system and 2U Patching frame accepting up to 5 modules in 1U and up to 12 x modules in 2U space. Standard module comes with 4 x Category 6A screened tool free RJ-45 keystone jacks for on-site cable termination. Module can be used as a platform to install factory made copper preterm assemblies.   

See PDF Download For More Information.

Ultra High Density MPO/MTP Adaptor Module.

MPO/MTP adapter modules are used to interconnect MPO/MTP trunks, pigtails, patchcords or ruggedised MPO/MTP fanouts. MPO/MTP adapter interface reduces rack space usage.Substituting MPO/MTP module with adapter plate reduces amount of interconnections and improves power budget and network economics.

See PDF Download For More Information.

MPO MicroCable Trunk Assembly.

MPO MicroCable Trunks facilitate rapid deployment of high density backbone cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are used to interconnect cassettes, panels or ruggedised MPO Fan Outs, spanning MDA, HDA and EDA zones.

See PDF Download For More Information.

Ultra High Density (UHD) MPO Module.

UHD module with its unique footprint provides scalability for high density fiber optics infrastructure with up to 288 fibers inside a 2U space. Patented  LC Quad shuttered adapter design allows for connector finger access without the need of using extra extraction tool.

See PDF Download For More Information.

Ultra High Density Modules are the platform for hosting pre-terminated cable assemblies. Solution brings advantage of speed installation, improved power budget as well as improved economics vs traditional modular MPO systems.Assemblies can be pre-installed inside modules in the factory and supplied to the installation site for instant deployment ready to operate. Alternatively if required pre-terminated cables can be fitted inside module post installation in the field.Variety of configuration is available intermixing “No plug, just play” modules with MPO trunks and modules, splice modules and variety of multifiber cable assemblies.

See PDF Download For More Information.

This innovative, high density pivot panel is designed to accept 24 SC simplex footprint adapters within each of the four ½ U trays. Each tray fully manages the incoming fibers, pigtails and splices.The panel can pivot by up to 120° to allow easy access during installation or rework with no disturbance of the existing cable or fibers. Angled adapters route exiting patchcords directly into the cabinet side management.An optional bracket maintains the minimum bend radius in any direction. The panel can be assembled to pivot in either direction, facilitating cable entry from either side. Ventilation tracts allow free flow of air through the panel, providing highly efficient cooling for active equipment.

This 1U Pre-term Breakout Panel is designed to provide housing for connections from a preterm to patch cords. The open frame allows for quick and easy installation of connectors. Having the option to use an array of different adapter types by using a different front plate makes this panel suitable for a wide range of applications. A key feature of the panel is that it provides space within the 1U space to route the patch cords through to the back of the rack.

High Density Pivot Panel with maximum "Cooling Airflow" capability

An innovative, high density pivot panel designed to accept 24 SC simplex footprint adapters within each of two ½ U trays. Each tray fully manages the incoming fibers, pigtails and splices. The panel can pivot by up to 116° to allow easy access during installation or rework with no disturbance of the existing cable or fibers. Angled adapters route exiting patch cords directly into the cabinet side management. An optional bracket maintains the minimum bend radius in any direction. The panel can be assembled to pivot in either direction, facilitating cable entry from either side. Ventilation tracts allow free flow of air through the panel, providing highly efficient cooling for active equipment.

This 1U Pre-term Breakout Panel is designed to provide housing for connections from a preterm to patch cords. The open frame allows for quick and easy installation of connectors. Having the option to use an array of different adapter types by using a different front plate makes this panel suitable for a wide range of applications. A key feature of the panel is that it provides space within the 1U space to route the patch cords through to the back of the rack.