Search results for: 'used 4 part'

MPO MicroCable Trunk Assembly.

MPO MicroCable Trunks facilitate rapid deployment of high density backbone cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are used to interconnect cassettes, panels or ruggedised MPO Fan Outs, spanning MDA, HDA and EDA zones.

See PDF Download For More Information.

Ultra High Density MPO/MTP Adaptor Module.

MPO/MTP adapter modules are used to interconnect MPO/MTP trunks, pigtails, patchcords or ruggedised MPO/MTP fanouts. MPO/MTP adapter interface reduces rack space usage.Substituting MPO/MTP module with adapter plate reduces amount of interconnections and improves power budget and network economics.

See PDF Download For More Information.

MPO MicroCable Patch Assembly (Single Jacket 3mm OD).

MPO MicroCable Patch assemblies facilitate rapid deployment of high density cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are typically used for patching within MDA zone or interconnect MPO active equipment ports with backbone cabling.

See PDF Download For More Information.

One-Click Cleaners are an easy-to-use option for cleaning fiber optic connectors on jumpers and in adapters. Simply insert the One-Click Cleaner into an adapter and push until an audible “click” is heard. The One-Click Cleaner uses the mechanical push action to advance an optical grade cleaning tape while the cleaning tip is rotated to ensure the fiber end-face is effectively, but gently cleaned.

Cat6a Toolless field termination RJ45 Plug., no tools required, Cat.6A, plug for customising In the field to enable simple connections without using a crimping tool

MPO MicroCable Fan-Out Assembly.

MPO Fan-Out Assemblies interface multifiber MPO with discrete single fiber (LC/SC) connectors. Assemblies are typically used to directly interconnect MPO  cassettes, panels or backbone trunk assemblies with the active equipment ports, saving costly data center rack space and easing fiber management. Replacing traditional MPO  module Fan-Out Assemblies reduce amount of interconnection improving power budget cost effectiveness.   

See PDF Download For More Information.

RJ21 Telco - 24w RJ45 Leaded Panel can be used for Grandstream Voice Gateway. 

Complete with a male baillock connector & 180degree hood.

Cletop MPO/MTP® Cassette Cleaner with pins (white tape).

• Ideal for labs, assembly lines, and field use
• Cleans MPO/MTP with pins

UltraSlim Panel 1U 19" MPO - Up To 96 Fibers.

The UltraSlim Panels provide secure transitions between MPO and LC or SC discrete connector interfaces. They are used to interface MPO  backbones with LC or SC patching and active equipment connections.

See PDF Download For More Information.

CSB07 FTTH User outlet unloaded.

The internal customer outlet box is designed for use inside the home. The box is designed with integrated shutters to comply with safety standards.

This 1U Pre-term Breakout Panel is designed to provide housing for connections from a preterm to patch cords. The open frame allows for quick and easy installation of connectors. Having the option to use an array of different adapter types by using a different front plate makes this panel suitable for a wide range of applications. A key feature of the panel is that it provides space within the 1U space to route the patch cords through to the back of the rack.

This 1U Pre-term Breakout Panel is designed to provide housing for connections from a preterm to patch cords. The open frame allows for quick and easy installation of connectors. Having the option to use an array of different adapter types by using a different front plate makes this panel suitable for a wide range of applications. A key feature of the panel is that it provides space within the 1U space to route the patch cords through to the back of the rack.

CXP/CFP 100G MPO Cable Assembly.

CXP/CFP 100G MPO/MTP® cable assemblies are designed to make a connection between 2 CFP/CXP transceivers. They are built using 24 fiber ferrule MPO/MTP  connectors with custom fiber mapping polarity to provide connection between 100GBASE-SR10 CFP/CXP devices.

See PDF Download For More Information.

MPO/MTP Loop Back.

MPO/MTP Loopback are used widely within testing environment especially within parallel optics 40 and 100G networks. Devices allow verification and testing of transceivers featuring MPO/MTP interface - 40G BASED-SR4 QSFP+ or 100G BASE-SR10 CXP/CFP devices. Loopbacks are built to link Transceivers (TX) and Receivers (RX) positions of MPO/MTP transceivers interfaces. MPO/MTP loopbacks can facilitate and speed up IL testing of optical networks segments by connecting them to MPO/MTP trunks/patch leads.

See PDF Download For More Information.