Search results for: 'valv medications hood www.mazafakas.com use profile 6631965'

MPO MicroCable Trunk Assembly.

MPO MicroCable Trunks facilitate rapid deployment of high density backbone cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are used to interconnect cassettes, panels or ruggedised MPO Fan Outs, spanning MDA, HDA and EDA zones.

See PDF Download For More Information.

MPO MicroCable Patch Assembly (Single Jacket 3mm OD).

MPO MicroCable Patch assemblies facilitate rapid deployment of high density cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are typically used for patching within MDA zone or interconnect MPO active equipment ports with backbone cabling.

See PDF Download For More Information.

CXP/CFP 100G MPO Cable Assembly.

CXP/CFP 100G MPO/MTP® cable assemblies are designed to make a connection between 2 CFP/CXP transceivers. They are built using 24 fiber ferrule MPO/MTP  connectors with custom fiber mapping polarity to provide connection between 100GBASE-SR10 CFP/CXP devices.

See PDF Download For More Information.

Custom Cable 24w Keystone Loom Cat6a. Pre Terminated Cable looms Vpanel-panel. Fully tested, all cables are supplied using braided sleeving and sleeved in 4 x 6way looms for ease of installation Panel - Panel.labelled for identification.Image is indicative only. Pre loomed plug and play solution.

MPO MicroCable Fan-Out Assembly.

MPO Fan-Out Assemblies interface multifiber MPO with discrete single fiber (LC/SC) connectors. Assemblies are typically used to directly interconnect MPO  cassettes, panels or backbone trunk assemblies with the active equipment ports, saving costly data center rack space and easing fiber management. Replacing traditional MPO  module Fan-Out Assemblies reduce amount of interconnection improving power budget cost effectiveness.   

See PDF Download For More Information.

Ultra High Density (UHD) MPO Module.

UHD module with its unique footprint provides scalability for high density fiber optics infrastructure with up to 288 fibers inside a 2U space. Patented  LC Quad shuttered adapter design allows for connector finger access without the need of using extra extraction tool.

See PDF Download For More Information.

Ultra High Density MPO/MTP Adaptor Module.

MPO/MTP adapter modules are used to interconnect MPO/MTP trunks, pigtails, patchcords or ruggedised MPO/MTP fanouts. MPO/MTP adapter interface reduces rack space usage.Substituting MPO/MTP module with adapter plate reduces amount of interconnections and improves power budget and network economics.

See PDF Download For More Information.

CSB10  FTTH Customer Outlet.

This wall termination box is designed for FTTH applications, with similar dimensions to existing telephone connections it is well suited to home or office environments. The box can allow up to 4 fibers whilst maintaining the minimum bend radius. A variety of adapters (LC/SC, & square ST, FC) can be used giving the user a flexible solution.

Cat6 UTP LSZH DataLok secure lock patch lead.

• Prevents accidental disconnects
• Prevents tampering
• Can be manufactured to bespoke lengths.
• Please call if you cannot see the length you need.

Cat5e UTP LSZH DataLok secure lock patch lead.

• Prevents accidental disconnects
• Prevents tampering
• Can be manufactured to bespoke lengths
• Please can you cannot see the length you need.

UltraSlim Panel 1U 19" MPO - Up To 96 Fibers.

The UltraSlim Panels provide secure transitions between MPO and LC or SC discrete connector interfaces. They are used to interface MPO  backbones with LC or SC patching and active equipment connections.

See PDF Download For More Information.

Cat6a S/FTP LSZH DataLok secure lock patch lead.

• Prevents accidental disconnects
• Prevents tampering
• Can be manufactured to bespoke lengths.
• Please call if you cannot see the length you need.

HP ProCurve J9142B Compatible Gigabit Bi-Directional SFP Module

• HP ProCurve Compatible
• SFP Form Factor
• Gigabit Speed
• 10km Transmission Distance 
• Downstream Bi-Directional
• 1490/1310nm Wavelength
• Simplex LC Connector

Enable bi-directional fibre optic transmission on your HP ProCurve brand switches, routers, security appliances and more using a single strand of fibre. The HP ProCurve J9142B Compatible Gigabit Bi-Di SFP Module by Advance is fully tested to ensure 100% compliance with all HP ProCurve switches, routers, appliances and devices that support J9142B modules. Fast plug-and-play operation, simply insert the Advance module into a spare SFP port and enjoy Gigabit speeds using a single strand of singlemode fibre.

Cca MPO MicroCable Patch Assembly (Single Jacket 3mm OD).

MPO patch cable assemblies built using Cca compliant cable to address current CPR EU regulations, local standards or local guidances. Selecting Cca Euroclass cable provides assurance that premium product is selected for areas of high risk to people (escape routes, hospitals, public buildings). Assemblies are offered with selection of multifibre (MPO) and single fibre (SF- LC, SC) terminations.    

See PDF Download For More Information.

Ultra High Density Copper Module.

UHD (Ultra High Density) Copper Module compliments UHD system allowing for copper links to co-exist in common with fiber optics oriented high density management. Copper module if fully compatible with 0U, 1U and 2U UHD chassis system and 2U Patching frame accepting up to 5 modules in 1U and up to 12 x modules in 2U space. Standard module comes with 4 x Category 6A screened tool free RJ-45 keystone jacks for on-site cable termination. Module can be used as a platform to install factory made copper preterm assemblies.   

See PDF Download For More Information.