Search results for: 'pink fibre'

Cca MPO MicroCable Patch Assembly (Single Jacket 3mm OD).

MPO patch cable assemblies built using Cca compliant cable to address current CPR EU regulations, local standards or local guidances. Selecting Cca Euroclass cable provides assurance that premium product is selected for areas of high risk to people (escape routes, hospitals, public buildings). Assemblies are offered with selection of multifibre (MPO) and single fibre (SF- LC, SC) terminations.    

See PDF Download For More Information.

IP rated external termination box.

The termination box is designed for use on the external wall of residential or small business premises. The unit houses a single splice tray and allows fibers from externally fed cables (Blown Fiber or conventional), to be spliced to pigtails for connection to the optical network unit. Pigtail fibers or patch cords are routed through the external wall fabric via a rear entry/exit position and are protected by 25mm diameter conduit. The unit can also be used as a transition point between internal and external cable.

The compact termination box is designed for use in residential and business applications for the termination of up to four fibers. The wall box enables the installation of either a single Blown Tube cable using up to a 4 fiber blown unit or two 2 fiber ruggedised cables to be spliced to four SC pigtails (PC or APC), which connect to adapters at the base of the unit. The unit can be quickly installed within an office, house or communication room environment.

Ultra High Density (UHD) MPO Module.

UHD module with its unique footprint provides scalability for high density fiber optics infrastructure with up to 288 fibers inside a 2U space. Patented  LC Quad shuttered adapter design allows for connector finger access without the need of using extra extraction tool.

See PDF Download For More Information.

MPO MicroCable Fan-Out Assembly.

MPO Fan-Out Assemblies interface multifiber MPO with discrete single fiber (LC/SC) connectors. Assemblies are typically used to directly interconnect MPO  cassettes, panels or backbone trunk assemblies with the active equipment ports, saving costly data center rack space and easing fiber management. Replacing traditional MPO  module Fan-Out Assemblies reduce amount of interconnection improving power budget cost effectiveness.   

See PDF Download For More Information.

The 6U HCF Splicing & Patch Frame is a high density rack mountable fiber management solution that splices and patches up to 864 fibers in a 6RU cabinet space. The 6U HCF has ribbon cabling splicing via a rear positioned hinge down panels that is supplied with a latching feature for both open and closed positions and shuttered Ultra High Density LC adapter modules on the front of the frame, allowing for smooth patching and easy LC port access.

One-Click Cleaners are an easy-to-use option for cleaning fiber optic connectors on jumpers and in adapters. Simply insert the One-Click Cleaner into an adapter and push until an audible “click” is heard. The One-Click Cleaner uses the mechanical push action to advance an optical grade cleaning tape while the cleaning tip is rotated to ensure the fiber end-face is effectively, but gently cleaned.

CXP/CFP 100G MPO Cable Assembly.

CXP/CFP 100G MPO/MTP® cable assemblies are designed to make a connection between 2 CFP/CXP transceivers. They are built using 24 fiber ferrule MPO/MTP  connectors with custom fiber mapping polarity to provide connection between 100GBASE-SR10 CFP/CXP devices.

See PDF Download For More Information.

40G QSFP+ (MPO) To 4x10G SFP+ (8xLC) Assembly.

40G parallel optics transceivers (40GBASE-SR4) can support 4x10G modes– this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. MPO QSFP+ to SFP+ Fan-out Assemblies provide connections between single QSFP+ (40G transceiver with MPO interface) and 4 x SFP+ (10G transceivers with LC(DX) Interface). Parallel optics 40GBASE-SR4 uses 8 out of 12 MPO interface fibers transmitting 4 x Duplex (DX) channels (4 x Transmit and 4 x Receive). QSFP+ to SFP+ Fanout is 8 x Fibers MPO to LC(DX) Ruggedized Fan-out assembly. Assembly utilizes new miniature version of breakout module saving fiber management space and providing secure transition between cable and tails.

See PDF Download For More Information.

CSB10  FTTH Customer Outlet.

This wall termination box is designed for FTTH applications, with similar dimensions to existing telephone connections it is well suited to home or office environments. The box can allow up to 4 fibers whilst maintaining the minimum bend radius. A variety of adapters (LC/SC, & square ST, FC) can be used giving the user a flexible solution.