IP rated external termination box.

The termination box is designed for use on the external wall of residential or small business premises. The unit houses a single splice tray and allows fibers from externally fed cables (Blown Fiber or conventional), to be spliced to pigtails for connection to the optical network unit. Pigtail fibers or patch cords are routed through the external wall fabric via a rear entry/exit position and are protected by 25mm diameter conduit. The unit can also be used as a transition point between internal and external cable.

Learn More

Cat6a Stranded Core Patch Cable available 9 colours - 305mt

Learn More

MTP ELITE Female LOOPBACK MM 50/125 12 Fibres TYPE 1 (QSFP+ 40G). Learn More

MTP ELITE Female LOOPBACK MM 50/125 24 Fibres VARIANT 1 (CXP/CFP 100G) Learn More

5mt LC-SC 50/125 Flat Twin Ruggerdized Fibre Lead Orange Learn More

5mt LC-LC 50/125 Flat Twin Ruggerdized Fibre Lead Orange Learn More

22mt LC-LC 50/125 OM3 Flat Twin Ruggerdized Fibre Lead Orange Learn More

Excel Category 6A S/FTP High Density Patch Leads are ideal for high density applications where access is difficult. Plugging and un-plugging is achieved through the unique push-pull design of the RJ45 connector and the use of a special tool (available separately) which extends the grip and prevents the necessity to release the connector with the fingers. Learn More

5mt 24core Pre Term sc-sc 50/125 Fibre lead Learn More

IEC (C14) to IEC Lock Plus (C13) Black.

Learn More

25mm PVC Tape Learn More

Dome 05-09 Fiber Splice Enclosure

Learn More

The compact termination box is designed for use in residential and business applications for the termination of up to four fibers. The wall box enables the installation of either a single Blown Tube cable using up to a 4 fiber blown unit or two 2 fiber ruggedised cables to be spliced to four SC pigtails (PC or APC), which connect to adapters at the base of the unit. The unit can be quickly installed within an office, house or communication room environment.

Learn More

The 6U HCF Splicing & Patch Frame is a high density rack mountable fiber management solution that splices and patches up to 864 fibers in a 6RU cabinet space. The 6U HCF has ribbon cabling splicing via a rear positioned hinge down panels that is supplied with a latching feature for both open and closed positions and shuttered Ultra High Density LC adapter modules on the front of the frame, allowing for smooth patching and easy LC port access.

Learn More

UltraSlim Panel 1U 19" MPO - Up To 96 Fibers.

The UltraSlim Panels provide secure transitions between MPO and LC or SC discrete connector interfaces. They are used to interface MPO  backbones with LC or SC patching and active equipment connections.

See PDF Download For More Information.

Learn More