•  PLEASE CALL FOR LENGTHS NOT SHOWN - WE CAN MANUFACTURE TO ANY LENGTH REQUIRED.

Cat6 UK Custom Made snagless booted LSZH ROLLOVER cable.

MPO MicroCable Fan-Out Assembly.

MPO Fan-Out Assemblies interface multifiber MPO with discrete single fiber (LC/SC) connectors. Assemblies are typically used to directly interconnect MPO  cassettes, panels or backbone trunk assemblies with the active equipment ports, saving costly data center rack space and easing fiber management. Replacing traditional MPO  module Fan-Out Assemblies reduce amount of interconnection improving power budget cost effectiveness.   

See PDF Download For More Information.

The 6U HCF Splicing & Patch Frame is a high density rack mountable fiber management solution that splices and patches up to 864 fibers in a 6RU cabinet space. The 6U HCF has ribbon cabling splicing via a rear positioned hinge down panels that is supplied with a latching feature for both open and closed positions and shuttered Ultra High Density LC adapter modules on the front of the frame, allowing for smooth patching and easy LC port access.

40G QSFP+ (MPO) To 4x10G SFP+ (8xLC) Assembly.

40G parallel optics transceivers (40GBASE-SR4) can support 4x10G modes– this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. MPO QSFP+ to SFP+ Fan-out Assemblies provide connections between single QSFP+ (40G transceiver with MPO interface) and 4 x SFP+ (10G transceivers with LC(DX) Interface). Parallel optics 40GBASE-SR4 uses 8 out of 12 MPO interface fibers transmitting 4 x Duplex (DX) channels (4 x Transmit and 4 x Receive). QSFP+ to SFP+ Fanout is 8 x Fibers MPO to LC(DX) Ruggedized Fan-out assembly. Assembly utilizes new miniature version of breakout module saving fiber management space and providing secure transition between cable and tails.

See PDF Download For More Information.

CXP/CFP 100G MPO Cable Assembly.

CXP/CFP 100G MPO/MTP® cable assemblies are designed to make a connection between 2 CFP/CXP transceivers. They are built using 24 fiber ferrule MPO/MTP  connectors with custom fiber mapping polarity to provide connection between 100GBASE-SR10 CFP/CXP devices.

See PDF Download For More Information.

IP rated external termination box.

The termination box is designed for use on the external wall of residential or small business premises. The unit houses a single splice tray and allows fibers from externally fed cables (Blown Fiber or conventional), to be spliced to pigtails for connection to the optical network unit. Pigtail fibers or patch cords are routed through the external wall fabric via a rear entry/exit position and are protected by 25mm diameter conduit. The unit can also be used as a transition point between internal and external cable.

Inline Enclosure