Search results for: 'fibre cable good 10m been for reel pickcard 125'

IP rated external termination box.

The termination box is designed for use on the external wall of residential or small business premises. The unit houses a single splice tray and allows fibers from externally fed cables (Blown Fiber or conventional), to be spliced to pigtails for connection to the optical network unit. Pigtail fibers or patch cords are routed through the external wall fabric via a rear entry/exit position and are protected by 25mm diameter conduit. The unit can also be used as a transition point between internal and external cable.

The compact termination box is designed for use in residential and business applications for the termination of up to four fibers. The wall box enables the installation of either a single Blown Tube cable using up to a 4 fiber blown unit or two 2 fiber ruggedised cables to be spliced to four SC pigtails (PC or APC), which connect to adapters at the base of the unit. The unit can be quickly installed within an office, house or communication room environment.

• PLEASE CALL FOR LENGTHS NOT SHOWN - WE CAN MANUFACTURE TO ANY LENGTH REQUIRED.

16 Core Pre Term OM3 Tight Buffered

• PLEASE CALL FOR LENGTHS NOT SHOWN - WE CAN MANUFACTURE TO ANY LENGTH REQUIRED.

24 Core Pre Term OM3 Tight Buffered

MPO/MTP Loop Back.

MPO/MTP Loopback are used widely within testing environment especially within parallel optics 40 and 100G networks. Devices allow verification and testing of transceivers featuring MPO/MTP interface - 40G BASED-SR4 QSFP+ or 100G BASE-SR10 CXP/CFP devices. Loopbacks are built to link Transceivers (TX) and Receivers (RX) positions of MPO/MTP transceivers interfaces. MPO/MTP loopbacks can facilitate and speed up IL testing of optical networks segments by connecting them to MPO/MTP trunks/patch leads.

See PDF Download For More Information.

The 6U HCF Splicing & Patch Frame is a high density rack mountable fiber management solution that splices and patches up to 864 fibers in a 6RU cabinet space. The 6U HCF has ribbon cabling splicing via a rear positioned hinge down panels that is supplied with a latching feature for both open and closed positions and shuttered Ultra High Density LC adapter modules on the front of the frame, allowing for smooth patching and easy LC port access.