Search results for: 'cable adsl'nvOpzp; AND 1=1 OR (<'">iKO)),'

RJ21 Cat3 25pair Telco cable

180 degree male connector with Bail Lock to Open end telco cable

Bail lock notches at the sides are for the female connector that's normally on a piece of equipment.

CAN MANUFACTURE TO ANY LENGTH REQUIRED - PLEASE CALL FOR ASSISTANCE.

Advance Active Gigabit 550m Multimode Duplex SC Media Converter

HOW IT WORK (SEE PICTURE)

1. Cat5e RJ45 Patch Cable 
2. Gigabit Multimode SC Media Converter 
3. OM3 SC Duplex Patch Cable OR PreTerminated Fibre Cable

UltraSlim Panel 1U 19" MPO - Up To 96 Fibers.

The UltraSlim Panels provide secure transitions between MPO and LC or SC discrete connector interfaces. They are used to interface MPO  backbones with LC or SC patching and active equipment connections.

See PDF Download For More Information.

UHD Mass Ribbon Splice Module.

UHD Mass Splice modules provides patching solution for AFL SpiderWeb Ribbon (SWR®) or ribbons cable types.

See PDF Download For More Information.

MPO/MTP Loop Back.

MPO/MTP Loopback are used widely within testing environment especially within parallel optics 40 and 100G networks. Devices allow verification and testing of transceivers featuring MPO/MTP interface - 40G BASED-SR4 QSFP+ or 100G BASE-SR10 CXP/CFP devices. Loopbacks are built to link Transceivers (TX) and Receivers (RX) positions of MPO/MTP transceivers interfaces. MPO/MTP loopbacks can facilitate and speed up IL testing of optical networks segments by connecting them to MPO/MTP trunks/patch leads.

See PDF Download For More Information.

Ultra High Density Splice Module.

Ultra High Density (UHD) System of 2U, 1U and 0U chassis is a platform offering modular splicing solution. UHD modules can feature special internal splice management housing conveniently up to 24 x splice positions. 2U rack space can contain up to 288 splice positions. Both LC (Up to 24 x ports per module) and SC (Up to 12 x ports per module) interfaces are provided. Modular splice system is ideal for Telco infrastructure. Natural demarcation by splice module provides easy selective access to installed/ spliced infrastructure and provides easy way of expending or changing services. Modules can be easily handled and splice work can take place in convenient position away from module destination rack position. Modules can be supplied with factory populated pigtails set or as an empty units.

See PDF Download For More Information.

Advance Active Gigabit 10km Singlemode Duplex SC Media Converter

HOW IT WORKS (SEE PICTURE)

Ultra High Density MPO/MTP Adaptor Module.

MPO/MTP adapter modules are used to interconnect MPO/MTP trunks, pigtails, patchcords or ruggedised MPO/MTP fanouts. MPO/MTP adapter interface reduces rack space usage.Substituting MPO/MTP module with adapter plate reduces amount of interconnections and improves power budget and network economics.

See PDF Download For More Information.

MPO MicroCable Fan-Out Assembly.

MPO Fan-Out Assemblies interface multifiber MPO with discrete single fiber (LC/SC) connectors. Assemblies are typically used to directly interconnect MPO  cassettes, panels or backbone trunk assemblies with the active equipment ports, saving costly data center rack space and easing fiber management. Replacing traditional MPO  module Fan-Out Assemblies reduce amount of interconnection improving power budget cost effectiveness.   

See PDF Download For More Information.