Search results for: '25 reel 12 black hook loss p no 500m'

MPO/MTP Loop Back.

MPO/MTP Loopback are used widely within testing environment especially within parallel optics 40 and 100G networks. Devices allow verification and testing of transceivers featuring MPO/MTP interface - 40G BASED-SR4 QSFP+ or 100G BASE-SR10 CXP/CFP devices. Loopbacks are built to link Transceivers (TX) and Receivers (RX) positions of MPO/MTP transceivers interfaces. MPO/MTP loopbacks can facilitate and speed up IL testing of optical networks segments by connecting them to MPO/MTP trunks/patch leads.

See PDF Download For More Information.

IP rated external termination box.

The termination box is designed for use on the external wall of residential or small business premises. The unit houses a single splice tray and allows fibers from externally fed cables (Blown Fiber or conventional), to be spliced to pigtails for connection to the optical network unit. Pigtail fibers or patch cords are routed through the external wall fabric via a rear entry/exit position and are protected by 25mm diameter conduit. The unit can also be used as a transition point between internal and external cable.

This innovative, high density pivot panel is designed to accept 24 SC simplex footprint adapters within each of the four ½ U trays. Each tray fully manages the incoming fibers, pigtails and splices.The panel can pivot by up to 120° to allow easy access during installation or rework with no disturbance of the existing cable or fibers. Angled adapters route exiting patchcords directly into the cabinet side management.An optional bracket maintains the minimum bend radius in any direction. The panel can be assembled to pivot in either direction, facilitating cable entry from either side. Ventilation tracts allow free flow of air through the panel, providing highly efficient cooling for active equipment.

High Density Pivot Panel with maximum "Cooling Airflow" capability

An innovative, high density pivot panel designed to accept 24 SC simplex footprint adapters within each of two ½ U trays. Each tray fully manages the incoming fibers, pigtails and splices. The panel can pivot by up to 116° to allow easy access during installation or rework with no disturbance of the existing cable or fibers. Angled adapters route exiting patch cords directly into the cabinet side management. An optional bracket maintains the minimum bend radius in any direction. The panel can be assembled to pivot in either direction, facilitating cable entry from either side. Ventilation tracts allow free flow of air through the panel, providing highly efficient cooling for active equipment.