Search results for: 'rj45 cat5e plug cob utp p no 100 12'

• PLEASE CALL FOR LENGTHS NOT SHOWN - WE CAN MANUFACTURE TO ANY LENGTH REQUIRED.

Cat6a UK Custom Made snagless booted patch lead - Green. 

N.B All length's are tip-tip (overall length).

• PLEASE CALL FOR LENGTHS NOT SHOWN - WE CAN MANUFACTURE TO ANY LENGTH REQUIRED.

Cat6a UK Custom Made snagless booted patch lead - Purple.

N.B All length's are tip-tip (overall length).

• PLEASE CALL FOR LENGTHS NOT SHOWN - WE CAN MANUFACTURE TO ANY LENGTH REQUIRED.

Cat6a UK Custom Made snagless booted patch lead - Orange.

N.B All length's are tip-tip (overall length).

• PLEASE CALL FOR LENGTHS NOT SHOWN - WE CAN MANUFACTURE TO ANY LENGTH REQUIRED.

Cat6a UK Custom Made snagless booted patch lead - Blue.

N.B All length's are tip-tip (overall length).

• PLEASE CALL FOR LENGTHS NOT SHOWN - WE CAN MANUFACTURE TO ANY LENGTH REQUIRED.

Cat6a UK Custom Made snagless booted patch lead - Black.

N.B All length's are tip-tip (overall length).

• PLEASE CALL FOR LENGTHS NOT SHOWN - WE CAN MANUFACTURE TO ANY LENGTH REQUIRED.

Cat6a UK Custom Made snagless booted patch lead - White.

N.B All length's are tip-tip (overall length).

MPO/MTP Loop Back.

MPO/MTP Loopback are used widely within testing environment especially within parallel optics 40 and 100G networks. Devices allow verification and testing of transceivers featuring MPO/MTP interface - 40G BASED-SR4 QSFP+ or 100G BASE-SR10 CXP/CFP devices. Loopbacks are built to link Transceivers (TX) and Receivers (RX) positions of MPO/MTP transceivers interfaces. MPO/MTP loopbacks can facilitate and speed up IL testing of optical networks segments by connecting them to MPO/MTP trunks/patch leads.

See PDF Download For More Information.

Cat6a Stranded Core Patch Cable available 9 colours - 305mt

RJ21 Telco - 24w RJ45 Leaded Panel can be used for Grandstream Voice Gateway. 

Complete with a male baillock connector & 180degree hood.

IP rated external termination box.

The termination box is designed for use on the external wall of residential or small business premises. The unit houses a single splice tray and allows fibers from externally fed cables (Blown Fiber or conventional), to be spliced to pigtails for connection to the optical network unit. Pigtail fibers or patch cords are routed through the external wall fabric via a rear entry/exit position and are protected by 25mm diameter conduit. The unit can also be used as a transition point between internal and external cable.

Ultra High Density MPO (24 Fiber Ferrule) Module.

Ultra High Density 24 fibers Module with single rear MPO/MTP port provide an interface between 24xfibers ferrules MPO/MTP Trunks or Patchleads and LC interface of active equipment.

See PDF Download For More Information.