Ultra High Density Modules are the platform for hosting pre-terminated cable assemblies. Solution brings advantage of speed installation, improved power budget as well as improved economics vs traditional modular MPO systems.Assemblies can be pre-installed inside modules in the factory and supplied to the installation site for instant deployment ready to operate. Alternatively if required pre-terminated cables can be fitted inside module post installation in the field.Variety of configuration is available intermixing “No plug, just play” modules with MPO trunks and modules, splice modules and variety of multifiber cable assemblies.

See PDF Download For More Information.

Cca MPO MicroCable Patch Assembly (Single Jacket 3mm OD).

MPO patch cable assemblies built using Cca compliant cable to address current CPR EU regulations, local standards or local guidances. Selecting Cca Euroclass cable provides assurance that premium product is selected for areas of high risk to people (escape routes, hospitals, public buildings). Assemblies are offered with selection of multifibre (MPO) and single fibre (SF- LC, SC) terminations.    

See PDF Download For More Information.

IP rated external termination box.

The termination box is designed for use on the external wall of residential or small business premises. The unit houses a single splice tray and allows fibers from externally fed cables (Blown Fiber or conventional), to be spliced to pigtails for connection to the optical network unit. Pigtail fibers or patch cords are routed through the external wall fabric via a rear entry/exit position and are protected by 25mm diameter conduit. The unit can also be used as a transition point between internal and external cable.

This innovative, high density pivot panel is designed to accept 24 SC simplex footprint adapters within each of the four ½ U trays. Each tray fully manages the incoming fibers, pigtails and splices.The panel can pivot by up to 120° to allow easy access during installation or rework with no disturbance of the existing cable or fibers. Angled adapters route exiting patchcords directly into the cabinet side management.An optional bracket maintains the minimum bend radius in any direction. The panel can be assembled to pivot in either direction, facilitating cable entry from either side. Ventilation tracts allow free flow of air through the panel, providing highly efficient cooling for active equipment.

High Density Pivot Panel with maximum "Cooling Airflow" capability

An innovative, high density pivot panel designed to accept 24 SC simplex footprint adapters within each of two ½ U trays. Each tray fully manages the incoming fibers, pigtails and splices. The panel can pivot by up to 116° to allow easy access during installation or rework with no disturbance of the existing cable or fibers. Angled adapters route exiting patch cords directly into the cabinet side management. An optional bracket maintains the minimum bend radius in any direction. The panel can be assembled to pivot in either direction, facilitating cable entry from either side. Ventilation tracts allow free flow of air through the panel, providing highly efficient cooling for active equipment.

Ultra High Density Splice Module.

Ultra High Density (UHD) System of 2U, 1U and 0U chassis is a platform offering modular splicing solution. UHD modules can feature special internal splice management housing conveniently up to 24 x splice positions. 2U rack space can contain up to 288 splice positions. Both LC (Up to 24 x ports per module) and SC (Up to 12 x ports per module) interfaces are provided. Modular splice system is ideal for Telco infrastructure. Natural demarcation by splice module provides easy selective access to installed/ spliced infrastructure and provides easy way of expending or changing services. Modules can be easily handled and splice work can take place in convenient position away from module destination rack position. Modules can be supplied with factory populated pigtails set or as an empty units.

See PDF Download For More Information.

RJ21 Cat3 25pair Telco cable

180 degree male connector with Bail Lock to 180 Degree Male Connector with screws.

Bail lock notches at the sides are for the female connector that's normally on a piece of equipment.

CAN MANUFACTURE TO ANY LENGTH REQUIRED - PLEASE CALL FOR ASSISTANCE.

RJ21 Cat3 25pair Telco cable

180 degree male connector with Bail Lock to 180 Degree Female Connector with screws.

Bail lock notches at the sides are for the female connector that's normally on a piece of equipment.

CAN MANUFACTURE TO ANY LENGTH REQUIRED - PLEASE CALL FOR ASSISTANCE

RJ21 Cat3 25pair Telco cable

180 degree male connector with Bail Lock to 90 Degree Male Connector with screws.

Bail lock notches at the sides are for the female connector that's normally on a piece of equipment.

CAN MANUFACTURE TO ANY LENGTH REQUIRED - PLEASE CALL FOR ASSISTANCE

RJ21 Cat3 25pair Telco cable

180 degree male connector with Bail Lock to 90 Degree Female Connector with screws.

Bail lock notches at the sides are for the female connector that's normally on a piece of equipment.

CAN MANUFACTURE TO ANY LENGTH REQUIRED - PLEASE CALL FOR ASSISTANCE

Ultra High Density Copper Module.

UHD (Ultra High Density) Copper Module compliments UHD system allowing for copper links to co-exist in common with fiber optics oriented high density management. Copper module if fully compatible with 0U, 1U and 2U UHD chassis system and 2U Patching frame accepting up to 5 modules in 1U and up to 12 x modules in 2U space. Standard module comes with 4 x Category 6A screened tool free RJ-45 keystone jacks for on-site cable termination. Module can be used as a platform to install factory made copper preterm assemblies.   

See PDF Download For More Information.

UHD Mass Ribbon Splice Module.

UHD Mass Splice modules provides patching solution for AFL SpiderWeb Ribbon (SWR®) or ribbons cable types.

See PDF Download For More Information.

25mt reel 16mm Black  hook & loop p/no 50200

25mt reel 25mm Black hook & loop p/no 50201

Fiber Optic Dome Enclosure 01-04