Search results for: '2mm 72 12'

Ultra High Density Modules are the platform for hosting pre-terminated cable assemblies. Solution brings advantage of speed installation, improved power budget as well as improved economics vs traditional modular MPO systems.Assemblies can be pre-installed inside modules in the factory and supplied to the installation site for instant deployment ready to operate. Alternatively if required pre-terminated cables can be fitted inside module post installation in the field.Variety of configuration is available intermixing “No plug, just play” modules with MPO trunks and modules, splice modules and variety of multifiber cable assemblies.

See PDF Download For More Information.

40G QSFP+ (MPO) To 4x10G SFP+ (8xLC) Assembly.

40G parallel optics transceivers (40GBASE-SR4) can support 4x10G modes– this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. MPO QSFP+ to SFP+ Fan-out Assemblies provide connections between single QSFP+ (40G transceiver with MPO interface) and 4 x SFP+ (10G transceivers with LC(DX) Interface). Parallel optics 40GBASE-SR4 uses 8 out of 12 MPO interface fibers transmitting 4 x Duplex (DX) channels (4 x Transmit and 4 x Receive). QSFP+ to SFP+ Fanout is 8 x Fibers MPO to LC(DX) Ruggedized Fan-out assembly. Assembly utilizes new miniature version of breakout module saving fiber management space and providing secure transition between cable and tails.

See PDF Download For More Information.

UltraSlim 144xFibres V-Panel 19" 1U 12xMPO To 144LC.

UltraSlim Panel is specially designed to accommodate high density cabling in high end data centre and telecommunication central office environment. The shallow profile of the UltraSlim Panel makes it suitable for low depth copper racking or telecommunications ODFs. Design accommodates extraction free shuttered LC QUAD adapters allowing for smooth patching and easy LC port access. V shape front and rear cable management facilitates provides a neat and tidy solution for managing incoming and exiting cables. Fixed panel offers both installation speed and cost effectiveness against typical high density modular system. Low loss Premium MPO and LC Premium versions are offered featuring significantly improved low insertion losses for demanding low power budget, high speed networks. 

See PDF Download For More Information.

Ultra High Density UltraSlim Panel 1U 19" MPO - Up To 144 Fibers.

The AFL Hyperscale® Ultra High Density (UHD) UltraSlim Panel is specially designed to accommodate high density cabling in high end data center and telecommunication central office environment. The shallow depth of the UHD UltraSlim Panel makes it suitable for low depth copper racking systems or telecommunications ODFs. Design accommodates extraction free shuttered LC QUAD adapters allowing for smooth patching and easy LC port access. The 1U 19“, 144 fiber MPO UltraSlim Panel contains factory controlled and tested MPO - LC assembly to deliver optical performance and reliability.Low loss Premium MPO and LC Premium versions are offered featuring significantly improved low insertion losses for demanding low power budget, high speed networks. Front and rear cable management facilitates provides a neat and tidy solution for managing incoming and exiting cables.

See PDF Download For More Information.

MPO/MTP Loop Back.

MPO/MTP Loopback are used widely within testing environment especially within parallel optics 40 and 100G networks. Devices allow verification and testing of transceivers featuring MPO/MTP interface - 40G BASED-SR4 QSFP+ or 100G BASE-SR10 CXP/CFP devices. Loopbacks are built to link Transceivers (TX) and Receivers (RX) positions of MPO/MTP transceivers interfaces. MPO/MTP loopbacks can facilitate and speed up IL testing of optical networks segments by connecting them to MPO/MTP trunks/patch leads.

See PDF Download For More Information.

IP rated external termination box.

The termination box is designed for use on the external wall of residential or small business premises. The unit houses a single splice tray and allows fibers from externally fed cables (Blown Fiber or conventional), to be spliced to pigtails for connection to the optical network unit. Pigtail fibers or patch cords are routed through the external wall fabric via a rear entry/exit position and are protected by 25mm diameter conduit. The unit can also be used as a transition point between internal and external cable.

Ultra High Density MPO (24 Fiber Ferrule) Module.

Ultra High Density 24 fibers Module with single rear MPO/MTP port provide an interface between 24xfibers ferrules MPO/MTP Trunks or Patchleads and LC interface of active equipment.

See PDF Download For More Information.

UltraSlim Base-8 144xFibres Transition V-Panel 1U 19" 18xMPO To 144LC.

UltraSlim Base-8 Transition panel is designed to allow connection of Base-8 100/40G (MPO) with lower speeds 25/10G interfaces (LC DX). High density design offers optimal space management with extraction tool free finger access to LC ports.Fixed panel offers both installation speed and cost effectiveness against legacy high density modular system. The shallow depth of UltraSlim profile is unique making it suitable for low depth cabinet or racking systems. V shape profiled front together with cable management accessories facilitates managing front and rear cabling. Low loss MPO and LC Premium terminations are offered featuring significantly improved low insertion losses for demanding low power budget, high speed networks. 

See PDF Download For More Information.

UltraSlim Base-8 96xFibres Transition V-Panel 1U 19" 12xMPO To 144LC.

UltraSlim Base-8 Transition panel is designed to allow connection of Base-8 100/40G (MPO) with lower speeds 25/10G interfaces (LC DX). Fixed panel offers both installation speed and cost effectiveness against typical high density modular system. The shallow depth of UltraSlim profile is unique making it suitable for low depth cabinet or racking systems. V shape profiled front together with cable management accessories facilitates managing front and rear cabling.  Low loss MPO and LC Premium terminations are offered featuring significantly improved low insertion losses for demanding low power budget, high speed networks. 

See PDF Download For More Information.

MPO MicroCable Trunk Assembly.

MPO MicroCable Trunks facilitate rapid deployment of high density backbone cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are used to interconnect cassettes, panels or ruggedised MPO Fan Outs, spanning MDA, HDA and EDA zones.

See PDF Download For More Information.

MPO MicroCable Patch Assembly (Single Jacket 3mm OD).

MPO MicroCable Patch assemblies facilitate rapid deployment of high density cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are typically used for patching within MDA zone or interconnect MPO active equipment ports with backbone cabling.

See PDF Download For More Information.

40G QSFP+ (MPO) To QSFP+ Assembly.

See PDF Download For More Information.

40G QSFP+ 3:2 (MPO) Transition Assembly.

See PDF Download For More Information.

The 6U HCF Splicing & Patch Frame is a high density rack mountable fiber management solution that splices and patches up to 864 fibers in a 6RU cabinet space. The 6U HCF has ribbon cabling splicing via a rear positioned hinge down panels that is supplied with a latching feature for both open and closed positions and shuttered Ultra High Density LC adapter modules on the front of the frame, allowing for smooth patching and easy LC port access.