Excel Category 6A S/FTP High Density Patch Leads are ideal for high density applications where access is difficult. Plugging and un-plugging is achieved through the unique push-pull design of the RJ45 connector and the use of a special tool (available separately) which extends the grip and prevents the necessity to release the connector with the fingers. Learn More

Excel Category 6A S/FTP High Density Patch Leads are ideal for high density applications where access is difficult. Plugging and un-plugging is achieved through the unique push-pull design of the RJ45 connector and the use of a special tool (available separately) which extends the grip and prevents the necessity to release the connector with the fingers. Learn More

RJ45 Strain Relief Boot Learn More

3x40G QSFP+ (MPO) To 12x10G SFP+ (8xLC) Transition Module.

40G parallel optics transceivers like QSFP+ can support 4x10G modes– this feature allows new parallel optics active equipment being compatible with existing 10G transceivers.3x40G QSFP+ (MPO) to 12x10G SFP+ (8xLC) Transition Module provides interface between 3xQSFP+ (40G transceiver with MPO interface) and 12xSFP+ devices (10G transceivers with LC(DX) Interface).Transition modules introduce convenient patching position facilitating potential adds, changes or reconfigurations to installed cabling and is a perfect alternative to fixed equipment to equipment connections provided by QSFP+ to SFP+ Fan-out Assemblies. Single 3x40G QSFP+ (MPO) to 12x10G SFP+ (8xLC) Transition Module provides a transition function of 3xQSFP+ to SFP+ Fan-out Assemblies.

See PDF Download For More Information.

Learn More

Planet 10/100/1000 Base-T to 1000 Base-SX SC Multimode (GT-802UK) Learn More

Planet 10/100/1000 Base-T to 1000 Base-LX SC Singlemode (GT-802SUK) Learn More

40G QSFP+ (MPO) To 4x10G SFP+ (8xLC) Assembly.

40G parallel optics transceivers (40GBASE-SR4) can support 4x10G modes– this feature allow new parallel optics active equipment being compatible with existing 10G transceivers. MPO QSFP+ to SFP+ Fan-out Assemblies provide connections between single QSFP+ (40G transceiver with MPO interface) and 4 x SFP+ (10G transceivers with LC(DX) Interface). Parallel optics 40GBASE-SR4 uses 8 out of 12 MPO interface fibers transmitting 4 x Duplex (DX) channels (4 x Transmit and 4 x Receive). QSFP+ to SFP+ Fanout is 8 x Fibers MPO to LC(DX) Ruggedized Fan-out assembly. Assembly utilizes new miniature version of breakout module saving fiber management space and providing secure transition between cable and tails.

See PDF Download For More Information.

Learn More

2x40G QSFP+ (MPO) To 8x10G SFP+ (16xLC) Transition Module.

40G parallel optics transceivers like QSFP+ can support 4x10G modes– this feature allows new parallel optics active equipment being compatible with existing 10G transceivers.2x40G QSFP+ (MPO/MTP®) to 8x10G SFP+ (16xLC) Transition Module provides interface between 2xQSFP+ (40G transceiver with MPO/MTP® interface) and 8xSFP+ devices (10G transceivers with LC(DX) Interface).Transition modules introduce convenient patching position facilitating potential adds, changes or reconfigurations to installed cabling and is a perfect alternative to fixed equipment to equipment connections provided by QSFP+ to SFP+ Fan-out Assemblies. Single 2x40G QSFP+ (MPO/MTP®) to 8x10G SFP+ (16xLC) Transition Module provides a transition function of 2xQSFP+ to SFP+ Fan-out Assemblies. All optical ports are positioned in front of UHD modules providing convenient front access.

See PDF Download For More Information.

Learn More

Cat6a Toolless field termination RJ45 Plug., no tools required, Cat.6A, plug for customising In the field to enable simple connections without using a crimping tool

Learn More

RACHET CRIMP TOOL RJ45 p/no 50015 Learn More

IP rated external termination box.

The termination box is designed for use on the external wall of residential or small business premises. The unit houses a single splice tray and allows fibers from externally fed cables (Blown Fiber or conventional), to be spliced to pigtails for connection to the optical network unit. Pigtail fibers or patch cords are routed through the external wall fabric via a rear entry/exit position and are protected by 25mm diameter conduit. The unit can also be used as a transition point between internal and external cable.

Learn More

The MicroScanner2 Cable Verifier presents a revolutionary change in voice, data, and video cable testing. It starts by taking results from what was four different test modes and displaying them all at once - graphical wiremap, pair lengths, distance to fault, cable ID, and far end device. What's more, its integrated RJ11, RJ45, and coax test ports support virtually any type of low-voltage cable testing with no need for awkward adaptors. The end result is reduced test time and technician error. That makes high-quality installations more efficient than ever. Revolutionary Interface - Graphical wiremap, length, cable ID, and distance to fault displayed on one screen Multimedia Support - Tests all common media types including RJ11, RJ45, Coax, with no need for adaptors IntelliTone Toning - Locates virtually any cable or wire pair with IntelliTone digital an analogue toning VDV Service Detection - Verifies today's media services, including 10/100/1000 Ethernet, POTS and PoE Rugged Housing - Integrated rubber holster enhances grip and makes it durable enough for the toughest jobs Oversized Display - Large, backlit LCD makes results crystal clear whether in bright sunshine or in a dark closet Learn More

Fiber Optic Dome Enclosure 01-04

Learn More

The 6U HCF Splicing & Patch Frame is a high density rack mountable fiber management solution that splices and patches up to 864 fibers in a 6RU cabinet space. The 6U HCF has ribbon cabling splicing via a rear positioned hinge down panels that is supplied with a latching feature for both open and closed positions and shuttered Ultra High Density LC adapter modules on the front of the frame, allowing for smooth patching and easy LC port access.

Learn More

Fiber Optic Dome Enclosure 10-14

Learn More