S03 1U Black Sliding Patch Panel - 24 Position SC/LC/E2000 up to 48 fibers

See Spec Sheet for more information

Dome 05-09 Fiber Splice Enclosure

MPO/MTP Loop Back.

MPO/MTP Loopback are used widely within testing environment especially within parallel optics 40 and 100G networks. Devices allow verification and testing of transceivers featuring MPO/MTP interface - 40G BASED-SR4 QSFP+ or 100G BASE-SR10 CXP/CFP devices. Loopbacks are built to link Transceivers (TX) and Receivers (RX) positions of MPO/MTP transceivers interfaces. MPO/MTP loopbacks can facilitate and speed up IL testing of optical networks segments by connecting them to MPO/MTP trunks/patch leads.

See PDF Download For More Information.

This innovative, robust 1U pivot patch panel has been designed to accept up to 48 fibers housed within a 1U space.With the ability to use a full array of adapter types offering a flexible solution to the end user, enabling them to incorporate a multifunctional panel which allows easy access during installation or re-work with no disturbance of the existing cable or fibers.

Miller Dual Hole Fiber Optic Stripper

Excel Internal/External Grade CST Fibre Cable 4 Core 9/125 OS2 P/NO 205-305 

• Can be cut to any length required, please call if you cannot see length required.

Excel Internal/External Grade CST Fibre Cable 8 Core 9/125 OS2 P/No 205-306 

• Can be cut to any length required, please call if you cannot see length required.

Excel Internal/External Grade CST Fibre Cable 12 Core 9/125 OS2 P/No 205-307

• Can be cut to any length required, please call if you cannot see length required.

Excel Internal/External Grade CST Fibre Cable 16 Core 9/125 OS2 P/No 205-308 

• Can be cut to any length required, please call if you cannot see length required.

Excel Internal/External Grade CST Fibre Cable 24 Core 9/125 OS2 P/NO 205-309

• Can be cut to any length required, please call if you cannot see length required.

The compact termination box is designed for use in residential and business applications for the termination of up to four fibers. The wall box enables the installation of either a single Blown Tube cable using up to a 4 fiber blown unit or two 2 fiber ruggedised cables to be spliced to four SC pigtails (PC or APC), which connect to adapters at the base of the unit. The unit can be quickly installed within an office, house or communication room environment.

IP rated external termination box.

The termination box is designed for use on the external wall of residential or small business premises. The unit houses a single splice tray and allows fibers from externally fed cables (Blown Fiber or conventional), to be spliced to pigtails for connection to the optical network unit. Pigtail fibers or patch cords are routed through the external wall fabric via a rear entry/exit position and are protected by 25mm diameter conduit. The unit can also be used as a transition point between internal and external cable.