Search results for: 'value medications hood www.mazafakas.com use profile 6631965'

Excel Category 6A S/FTP High Density Patch Leads are ideal for high density applications where access is difficult. Plugging and un-plugging is achieved through the unique push-pull design of the RJ45 connector and the use of a special tool (available separately) which extends the grip and prevents the necessity to release the connector with the fingers. Learn More

Excel Category 6A S/FTP High Density Patch Leads are ideal for high density applications where access is difficult. Plugging and un-plugging is achieved through the unique push-pull design of the RJ45 connector and the use of a special tool (available separately) which extends the grip and prevents the necessity to release the connector with the fingers. Learn More

CSB11 FTTH Customer Outlet SC Simplex / LC Duplex.

The internal customer outlet box is designed for use inside the home. The operator has the choice to have the box unloaded or equipped with adapters, the box is designed with integrated shutters to comply with safety standards.

Learn More

CSB12 FTTH Customer Outlet SC Duplex / LC Quad.

The internal customer outlet box is designed for use inside the home. The operator has the choice to have the box unloaded or equipped with adapters, the box is designed with integrated shutters to comply with safety standards.

Learn More

This 1U Pre-term Breakout Panel is designed to provide housing for connections from a preterm to patch cords. The open frame allows for quick and easy installation of connectors. Having the option to use an array of different adapter types by using a different front plate makes this panel suitable for a wide range of applications. A key feature of the panel is that it provides space within the 1U space to route the patch cords through to the back of the rack.

Learn More

The compact termination box is designed for use in residential and business applications for the termination of up to four fibers. The wall box enables the installation of either a single Blown Tube cable using up to a 4 fiber blown unit or two 2 fiber ruggedised cables to be spliced to four SC pigtails (PC or APC), which connect to adapters at the base of the unit. The unit can be quickly installed within an office, house or communication room environment.

Learn More

This 1U Pre-term Breakout Panel is designed to provide housing for connections from a preterm to patch cords. The open frame allows for quick and easy installation of connectors. Having the option to use an array of different adapter types by using a different front plate makes this panel suitable for a wide range of applications. A key feature of the panel is that it provides space within the 1U space to route the patch cords through to the back of the rack.

Learn More

IP rated external termination box.

The termination box is designed for use on the external wall of residential or small business premises. The unit houses a single splice tray and allows fibers from externally fed cables (Blown Fiber or conventional), to be spliced to pigtails for connection to the optical network unit. Pigtail fibers or patch cords are routed through the external wall fabric via a rear entry/exit position and are protected by 25mm diameter conduit. The unit can also be used as a transition point between internal and external cable.

Learn More

Cat6a Toolless field termination RJ45 Plug., no tools required, Cat.6A, plug for customising In the field to enable simple connections without using a crimping tool

Learn More

• CAT3 RJ21 Male Telco Breakout to 24 RJ45 Plugs.
• pins 4 & 5
• UK manufactured and 100% tested
• Available with 90 degree, 120 degree and 180 degree hoods
• Other lengths can be manufactured to order

Learn More

• CAT3 RJ21 female Telco Breakout to 24 RJ45 Plugs.
• acative on pins 4 & 5.
• UK manufactured and 100% tested
• Available with 90 degree and 180 degree hoods
• Other lengths can be manufactured to order

Learn More

This innovative, robust 1U pivot patch panel has been designed to accept up to 48 fibers housed within a 1U space.With the ability to use a full array of adapter types offering a flexible solution to the end user, enabling them to incorporate a multifunctional panel which allows easy access during installation or re-work with no disturbance of the existing cable or fibers.

Learn More

MPO MicroCable Trunk Assembly.

MPO MicroCable Trunks facilitate rapid deployment of high density backbone cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are used to interconnect cassettes, panels or ruggedised MPO Fan Outs, spanning MDA, HDA and EDA zones.

See PDF Download For More Information.

Learn More

MPO MicroCable Patch Assembly (Single Jacket 3mm OD).

MPO MicroCable Patch assemblies facilitate rapid deployment of high density cabling in data centers or other high fiber density environments reducing network installation or reconfiguration time and cost. They are typically used for patching within MDA zone or interconnect MPO active equipment ports with backbone cabling.

See PDF Download For More Information.

Learn More

CXP/CFP 100G MPO Cable Assembly.

CXP/CFP 100G MPO/MTP® cable assemblies are designed to make a connection between 2 CFP/CXP transceivers. They are built using 24 fiber ferrule MPO/MTP  connectors with custom fiber mapping polarity to provide connection between 100GBASE-SR10 CFP/CXP devices.

See PDF Download For More Information.

Learn More