Search results for: '50m female right angle open end cable'

Advance Active Gigabit 550m Multimode Duplex SC Media Converter

HOW IT WORK (SEE PICTURE)

1. Cat5e RJ45 Patch Cable 
2. Gigabit Multimode SC Media Converter 
3. OM3 SC Duplex Patch Cable OR PreTerminated Fibre Cable

Custom Cable 24w Keystone Loom Cat6a. Pre Terminated Cable looms Vpanel-panel. Fully tested, all cables are supplied using braided sleeving and sleeved in 4 x 6way looms for ease of installation Panel - Panel.labelled for identification.Image is indicative only. Pre loomed plug and play solution.

Cca MPO MicroCable Patch Assembly (Single Jacket 3mm OD).

MPO patch cable assemblies built using Cca compliant cable to address current CPR EU regulations, local standards or local guidances. Selecting Cca Euroclass cable provides assurance that premium product is selected for areas of high risk to people (escape routes, hospitals, public buildings). Assemblies are offered with selection of multifibre (MPO) and single fibre (SF- LC, SC) terminations.    

See PDF Download For More Information.

Advance Active Gigabit 10km Singlemode Duplex SC Media Converter

HOW IT WORKS (SEE PICTURE)

Ultra High Density Modules are the platform for hosting pre-terminated cable assemblies. Solution brings advantage of speed installation, improved power budget as well as improved economics vs traditional modular MPO systems.Assemblies can be pre-installed inside modules in the factory and supplied to the installation site for instant deployment ready to operate. Alternatively if required pre-terminated cables can be fitted inside module post installation in the field.Variety of configuration is available intermixing “No plug, just play” modules with MPO trunks and modules, splice modules and variety of multifiber cable assemblies.

See PDF Download For More Information.

IP rated external termination box.

The termination box is designed for use on the external wall of residential or small business premises. The unit houses a single splice tray and allows fibers from externally fed cables (Blown Fiber or conventional), to be spliced to pigtails for connection to the optical network unit. Pigtail fibers or patch cords are routed through the external wall fabric via a rear entry/exit position and are protected by 25mm diameter conduit. The unit can also be used as a transition point between internal and external cable.

MPO Loose Tube Trunk.

LooseTube Cable Assemblies  utilize the patented AFL Hyperscale® transition module and guarantees superior tensile strength and crushing resistance. The high density design can scale from 2 up to 144 fibers and can feature both 900 µm and ruggedised 2 mm tail leads. Assemblies can comprise of both multifiber MPO and discrete connectors, making the cable a flexible hybrid solution for diverse applications.

See PDF Download For More Information.

The compact termination box is designed for use in residential and business applications for the termination of up to four fibers. The wall box enables the installation of either a single Blown Tube cable using up to a 4 fiber blown unit or two 2 fiber ruggedised cables to be spliced to four SC pigtails (PC or APC), which connect to adapters at the base of the unit. The unit can be quickly installed within an office, house or communication room environment.

UHD Mass Ribbon Splice Module.

UHD Mass Splice modules provides patching solution for AFL SpiderWeb Ribbon (SWR®) or ribbons cable types.

See PDF Download For More Information.

UltraSlim Base-8 96xFibres Transition V-Panel 1U 19" 12xMPO To 144LC.

UltraSlim Base-8 Transition panel is designed to allow connection of Base-8 100/40G (MPO) with lower speeds 25/10G interfaces (LC DX). Fixed panel offers both installation speed and cost effectiveness against typical high density modular system. The shallow depth of UltraSlim profile is unique making it suitable for low depth cabinet or racking systems. V shape profiled front together with cable management accessories facilitates managing front and rear cabling.  Low loss MPO and LC Premium terminations are offered featuring significantly improved low insertion losses for demanding low power budget, high speed networks. 

See PDF Download For More Information.

UltraSlim Base-8 144xFibres Transition V-Panel 1U 19" 18xMPO To 144LC.

UltraSlim Base-8 Transition panel is designed to allow connection of Base-8 100/40G (MPO) with lower speeds 25/10G interfaces (LC DX). High density design offers optimal space management with extraction tool free finger access to LC ports.Fixed panel offers both installation speed and cost effectiveness against legacy high density modular system. The shallow depth of UltraSlim profile is unique making it suitable for low depth cabinet or racking systems. V shape profiled front together with cable management accessories facilitates managing front and rear cabling. Low loss MPO and LC Premium terminations are offered featuring significantly improved low insertion losses for demanding low power budget, high speed networks. 

See PDF Download For More Information.

Ultra High Density Copper Module.

UHD (Ultra High Density) Copper Module compliments UHD system allowing for copper links to co-exist in common with fiber optics oriented high density management. Copper module if fully compatible with 0U, 1U and 2U UHD chassis system and 2U Patching frame accepting up to 5 modules in 1U and up to 12 x modules in 2U space. Standard module comes with 4 x Category 6A screened tool free RJ-45 keystone jacks for on-site cable termination. Module can be used as a platform to install factory made copper preterm assemblies.   

See PDF Download For More Information.

• RJ21 Cat3 Telco Male - Male
• UK manufactured and 100% tested
• Available with 90 degree, 120 degree and 180 degree hoods
• Other lengths can be manufactured to order

IEC (C14) to IEC Lock Plus (C13) Black.